While debugging there is an issue called "An error has occurred. See error log for more details."

pankajprasad100 — Wed, 27 Jan 2021 04:49:19 GMT

Hello,

Previously I posted my query in below link

While debugging there is an issue called "An error... - NXP Community

After reinstall also facing same issue

I am working on urgent project quick response would be highly appreciated.

Re: While debugging there is an issue called "An error has occurred. See error log for more det

Robin_Shen — Wed, 27 Jan 2021 08:06:44 GMT

Hi pankajprasad100,

In the Debug Configurations dialog box, select the required debug configuration. The name of the debug configuration is composed of the project name, debugging interface and build configuration. The configuration settings appear on the tabs:

If I select hello_world_s32k144_debug_ram_pemico, the Name will shown in right side.

But don't know why the Name is blank at your side.

These configurations are set by default after selected.

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic Re: While debugging there is an issue called "An error has occurred. See error log for more det in S32 Design Studio

While debugging there is an issue called "An error has occurred. See error log for more details."

Re: While debugging there is an issue called "An error has occurred. See error log for more det