topic Can not find Standard S32DS C Linker Setting in S32 Design Studio

Can not find Standard S32DS C Linker Setting

port — Fri, 15 Jan 2021 00:58:45 GMT

Hi,

I am trying to add library file.

According to 'HOWTO_Add_a_static_library_file_into_S32DS_GCC_project' doc

I should add lib in 'S32DS C Linker' like below

However, I cannot find tat setting category like below

I am using 2.1 ver for Power Architecture.

How can I find that

Re: Can not find Standard S32DS C Linker Setting

stanish — Sat, 16 Jan 2021 21:54:27 GMT

Hi Port,

the missing Linker project settings indicate this is a library project instead of an exectutable S32DS project.

The screenshot depicted in HOWTO document refers to the Executable project which adds a library.

Hope it helps.

Stan

Re: Can not find Standard S32DS C Linker Setting

port — Wed, 20 Jan 2021 10:06:44 GMT

Thank you for your answer. I am still trying

Re: Can not find Standard S32DS C Linker Setting

jiri_kral — Wed, 20 Jan 2021 11:16:13 GMT

Hi,

basically - there are two type of S32DS projects: Library (after build you get .a library archive file) and executable project (you get .elf executable file).

in library project there is no linker settings. Library is just set of functions.

Linker settings is necessary for executable (.elf) project.

Hope it helps.

Re: Can not find Standard S32DS C Linker Setting

NXP2 — Wed, 17 Apr 2024 02:46:57 GMT

Hello, I follow the normal methods of generating and adding static libraries. When I added static libraries, the following error appeared. May I ask what caused it?

Building target: BMS_2_2.elf
Invoking: Standard S32DS C Linker
arm-none-eabi-gcc -o "BMS_2_2.elf" "@BMS_2_2.args"
arm-none-eabi-gcc.exe: error: : No such file or directory
make: *** [makefile:86: BMS_2_2.elf] Error 1
"make -j16 all" terminated with exit code 2. Build might be incomplete.

Re: Can not find Standard S32DS C Linker Setting

jiri_kral — Wed, 17 Apr 2024 08:55:21 GMT

Hi,

I'm not sure about your scenario, did you created new project (File -> New S32DS Project) or you added some library into existing one and compilation stops working? Can you please share more details?