S32 Design Studio中的主题 Re: Project with S32 Design Studio and IAR program flash issue

Project with S32 Design Studio and IAR program flash issue

chaitanya_kalyani — Tue, 08 Sep 2020 05:26:29 GMT

Hello,

I am facing issue for flash and debug the program when created with IAR compiler.

Following below steps

1. New Application project

and when I compile it then It don't have any issue.

But when I try to flash it then it is just building and after some time PE multilink is getting disconnected.

after abort getting below error

Please help me to solve this problem.

thank you in advance.

Re: Project with S32 Design Studio and IAR program flash issue

jiri_kral — Tue, 08 Sep 2020 07:33:09 GMT

Hi,

What is your board - it is custom one or NXP EVB? Is your board properly powered up? Is tour PE Multilink probe correctly connected to board?

Jiri

Re: Project with S32 Design Studio and IAR program flash issue

chaitanya_kalyani — Tue, 08 Sep 2020 11:58:19 GMT

I am using S32K144 EVB. Board is powered up properly. When I use example project then there is no issues. Issue is only when I create new project.

Re: Project with S32 Design Studio and IAR program flash issue

chaitanya_kalyani — Tue, 08 Sep 2020 12:15:01 GMT

Hello @jiri_kral

Thank you for quick response. I am using S32K144 EVB and board is powered up properly. When I flash example project then there is no issues. Issue is only when I create new project and try to flash it.

I am attaching sample project that I have created.

Re: Project with S32 Design Studio and IAR program flash issue

jiri_kral — Tue, 08 Sep 2020 12:55:33 GMT

Hi,

I tried import your project and there is no issue with flashing on my side. I used PE Micro Multilink FX. Can you share output from Debug console - if there is any? You can also try to re-install PE Micro drivers - with default install path located in c:\NXP\S32DS_ARM_v2.2\Drivers\

Jiri

Re: Project with S32 Design Studio and IAR program flash issue

chaitanya_kalyani — Wed, 23 Sep 2020 12:21:08 GMT

Hello @jiri_kral ,

Thank you for the quick response.

For flash might be there is some issue with the EVB board. It is not able to flash with PE Multilink but able to flash with OpenSDA.

Re: Project with S32 Design Studio and IAR program flash issue

jiri_kral — Wed, 23 Sep 2020 15:18:30 GMT

Hi,

what about power supply when connected to PE Micro Multilink? Did you provide external 12V or you are using USB?

Jiri