topic Re: S32 Design Studio for ARM, Version 2.0 install failed(online) in S32 Design Studio

S32 Design Studio for ARM, Version 2.0 install failed(online)

songlayue — Wed, 06 May 2020 05:10:19 GMT

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

jiri_kral — Wed, 06 May 2020 11:04:49 GMT

Hi,

S32DS for ARM v2.0 old one. Please try to install latest release https://community.nxp.com/docs/DOC-345517

Jiri

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

mikedoidge — Thu, 07 May 2020 19:01:45 GMT

Hello songlayue@xyl.cn‌,

This is likely the known issue: https://community.nxp.com/docs/DOC-345241

Best Regards,

Mike

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

songlayue — Tue, 12 May 2020 04:54:16 GMT

when i choose the offline installation mode.I found that there was an error in activation.xml.

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

songlayue — Tue, 12 May 2020 04:55:27 GMT

I try many ways,but there was no way to solve the problem

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

songlayue — Tue, 12 May 2020 05:05:50 GMT

https://community.nxp.com/message/1110268?commentID=1110268#comment-1110268

I have the same problem with this issue.Has the problem been solved?

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

songlayue — Tue, 12 May 2020 05:53:03 GMT

this is request.xml.I have problem in "UniqueMachineNumber".there was no values.

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

mikedoidge — Tue, 12 May 2020 22:46:31 GMT

Hi songlayue@xyl.cn‌,

It appears you are using the wrong activation code. The one on your account starts with '3564'. But it seems you are using a code which begins with '9A2B'. Please check your NXP.com account again and use the correct activation code. You should be able to complete the activation and install.

Best Regards and Stay Safe,

Mike

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

songlayue — Wed, 13 May 2020 00:33:36 GMT

hello Mike

my activation code is shown in the following picture.Ididn't fing anything that starts with "3564"

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

songlayue — Wed, 13 May 2020 00:44:44 GMT

I'm using the S32 Design Studio_ARM v2.0,the activation code is shown in the above picture

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

jorge_plascencia — Wed, 13 May 2020 15:37:56 GMT

HI song layue,

Can you please generate an offline request and send it to me by email to jorge.plascencia@nxp.com please.

Regards,

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

mikedoidge — Wed, 13 May 2020 16:08:01 GMT

Hello Song,

You are correct. That is the correct activation code to use. I was looking at the one for v2.2. Do you receive the same issue with v2.2?

Also, are you attempting the activation from behind a firewall? It is possible that the firewall could be blocking something.

I think you are correct about the missing <UniqueMachineNumber>

This must be present to get the activation to work.

We have not seen this exact issue before. Since the activation is through FlexNet and the installer is InstallAnywhere, we may need to consult with Flexera on this issue. Any additional clues you can provide would be helpful.

There should be an installation log file. It would be located at: C:\NXP\S32DS_ARM_v2.0\_S32 Design Studio for ARM Version 2.0_installation\Logs. Perhaps there is an error code listed there which would be useful. Could you please provide this log file?

Best Regards,

Mike

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

mso — Wed, 13 May 2020 18:41:53 GMT

Hello,

This activation XML has empty UMN1 and UMN2; can it be that you are using virtual hard disk (or anything special like RAID/SCSI/Flash), and no Ethernet adapter? I would recommend to enable Ethernet adapter then.

Machine ID is in place that is good, but it could be rejected for say losing trust or due to issues in FlexNET fallback.

Best regards,

Mikhail

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

songlayue — Thu, 14 May 2020 04:58:54 GMT

hello,Mike

I'm sorry to tell you that the same issue with v2.2.I can't find anything in C:\NXP\S32DS_ARM_v2.0\_S32 Design Studio for ARM Version 2.0_installation\Logs.it's a empty document.

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

songlayue — Thu, 14 May 2020 05:11:11 GMT

sorry ,I'm not sure about that.So what's the solution??

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

songlayue — Thu, 14 May 2020 05:12:14 GMT

I had sent email to you .Looking forward to your replay.

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

mso — Thu, 14 May 2020 08:19:49 GMT

Do you install Design Studio on virtual or real computer?
Does your computer have Ethernet adapter?

Re: S32 Design Studio for ARM, Version 2.0 install failed(online)

songlayue — Mon, 18 May 2020 04:29:36 GMT

yes,I install Design Studio on a real computer and the computer have Ethernet adapter.