topic Re: Error in services launch sequence in S32 Design Studio

Error in services launch sequence

spn0534 — Tue, 14 Jan 2020 05:42:33 GMT

hello

i have use s32 design studio for ARM(2018 version)

i have face problem at time of debugging like

How can I solve this problem?

Re: Error in services launch sequence

jiri_kral — Wed, 15 Jan 2020 06:56:17 GMT

Hi,

what's your target MCU and debug probe?

Jiri

Re: Error in services launch sequence

spn0534 — Thu, 16 Jan 2020 05:50:46 GMT

hi jiri

My debugger setting is

Re: Error in services launch sequence

jiri_kral — Thu, 16 Jan 2020 12:09:12 GMT

Hi,

did you properly installed PE Micro's Cyclone driver? Isn't your debug probe in use by other application?

Jiri

Re: Error in services launch sequence

spn0534 — Thu, 16 Jan 2020 12:50:32 GMT

i have properly installed PE Micro's driver and debug probe in not use by other application.

Re: Error in services launch sequence

spn0534 — Tue, 21 Jan 2020 10:18:03 GMT

hii jiri

can u please give me solution to resolve above problem

Re: Error in services launch sequence

jiri_kral — Tue, 21 Jan 2020 10:58:23 GMT

Hi,

sorry for delay. Did you try use PE Micro tools as suggested in your previous thread? - https://community.nxp.com/message/1253788

Just make sure, that Cyclone is working under your OS.

Jiri

Re: Error in services launch sequence

spn0534 — Tue, 21 Jan 2020 12:25:54 GMT

hi jiri,

1)i don't have any PE Micro tools

is it any software tool?

2)I have change the PEMicro interface as openSDA embedded Debug -USB port then also i have face same problem

Re: Error in services launch sequence

jiri_kral — Tue, 21 Jan 2020 12:42:02 GMT

Hi,

try to re-install PW Micro drivers - with default install path located in c:\NXP\S32DS_Vision_v2018.R1\Drivers\ folder.

Jiri

Re: Error in services launch sequence

spn0534 — Wed, 22 Jan 2020 05:19:55 GMT

i have re-install PE Micro drivers many times but still my problem was not solved

Re: Error in services launch sequence

jiri_kral — Wed, 22 Jan 2020 06:44:16 GMT

Hi,

let's find out if the issue is caused by PE Micro driver - not sure which cyclone version do you have - but you can find proper software on PE Micro pages - PEmicro | Experts in Embedded tools for Flash Programming and Development .

Install it and check if your probe is working with PE Micro software. What about user rights? Do you have administrator privileges on your machine?

Jiri