topic Re: S32K144 EVB Flash Programming Error in S32 Design Studio

S32K144 EVB Flash Programming Error

nhuan_huynhduc2 — Thu, 20 Feb 2020 06:50:10 GMT

Hi,

Now, I'm working on S32 Design Studio for the S32K144 EVB and when I tried to flash my SW to the board, I got this issue.

And this is my debug configuration:

Could you pls help me resolve this issue?

Re: S32K144 EVB Flash Programming Error

jiri_kral — Thu, 20 Feb 2020 06:57:05 GMT

Hi,

what about power? Is your EVB powered? You can also try Emergency Kinetis device Recovery option:

Jiri

Re: S32K144 EVB Flash Programming Error

nhuan_huynhduc2 — Thu, 20 Feb 2020 08:00:26 GMT

Hi Jiri,

My EVB was powered and I also chose your option, but it still did not work.

Re: S32K144 EVB Flash Programming Error

jiri_kral — Thu, 20 Feb 2020 12:23:08 GMT

Hi,

can you debug RAM target? It is possible that your board is secured (for some reason). If So, RAM target will also fail.

Jiri

Re: S32K144 EVB Flash Programming Error

nhuan_huynhduc2 — Fri, 21 Feb 2020 04:23:10 GMT

Hi Jiti,

I've already debugged RAM target and it also failed.

How can I resolve this problem?

Re: S32K144 EVB Flash Programming Error

jiri_kral — Fri, 21 Feb 2020 06:53:31 GMT

Hi,

well, if the chip was secured and mass erase disabled (for example by accidental writing binary on bad address) - there is no way how to recover it. You need replace chip by new one.

As a last - you can try external debugger instead integrated OpenSDA (for example Segger J-link, PE Micro Multilink).

Jiri

Re: S32K144 EVB Flash Programming Error

nhuan_huynhduc2 — Tue, 25 Feb 2020 02:19:04 GMT

Hi Jiri,

When I worked with the GPIO module of S32K144 EVB, I had to configure all of the pins of it. In these pins, which I did not use I set their register default value is ZERO. Do you think it is the reason for my issue?

Thank you

Re: S32K144 EVB Flash Programming Error

jiri_kral — Tue, 25 Feb 2020 08:05:14 GMT

Hi,

Chip can be secured and mass erase disabled only by writing this option on address 0x400. There is no relation with GPIO stuff. What about external debugger? There is chance, that integrated OpenSDA is broken.

Jiri

Re: S32K144 EVB Flash Programming Error

nhuan_huynhduc2 — Tue, 25 Feb 2020 08:20:11 GMT

Hi Jiri,

My PC has still detected the OpenSDA port.

And the LED of the OpenSDA module still lights.