topic Re: using freeRTOS v10.1.1 with S32DS in S32 Design Studio

using freeRTOS v10.1.1 with S32DS

zhaoyanling — Thu, 21 Feb 2019 08:17:20 GMT

Dear Expert,

I develop software with S32KDS for ARM 2018R1. I find FreeRTOS v8.2.1 has been integrated with S32DS, but I want to use FreeRTOS v10.1.1. I did as following documents:

--《Tutorial: FreeRTOS 10.0.1 with NXP S32 Design Studio 2018.R1》

---《Using custom FreeRTOS with S32K SDK and OSIF for ARM》

by the way, I defined the symbol as following:

I download the McuOnEclipse FreeRTOS component, but I found there is no file: Header.h, shown as following:

1. But , after the component osif being added into my project, and building my project the following error is shown.I found the file osif_baremetal.c instead of osif_freertos.c.

How can file osif_freertos.c be got?

Could you help me? Thank you very much!

Re: using freeRTOS v10.1.1 with S32DS

jiri_kral — Thu, 21 Feb 2019 13:17:58 GMT

Hi,

FreeRTOS v8.2.1 is the version supported by S32DS and SDK. If you like to use different version - it is up to you how to implement it. It looks that ErichS‌ solution si working for others - Tutorial: FreeRTOS 10.0.1 with NXP S32 Design Studio 2018.R1 | MCU on Eclipse

osif_freertos.c file is located for example in

[YOUR_S32DS_INSTALL_PATH]\S32DS_ARM_v2018.R1\S32DS\S32SDK_S32K14x_RTM_2.0.0\rtos\osif\

or in similar path in any other SDK version folder.

Jiri

Re: using freeRTOS v10.1.1 with S32DS

zhaoyanling — Fri, 22 Feb 2019 01:49:38 GMT

Hi Jiri Kral,

First ,Thank you very much for your kind help.

I did as Eric Styger suggested. My problem is that: when I click "generate code" button, in folder "SDK", osif_baremetal.c is shown, it is wrong.

I think osif_freertos.c should be generated automatically into folder "SDK".

How can osif_freertos.c be shown in folder "SDK" automatically?

Could you help me again?

Thank you.