topic Re: When the MPC5744 starts simulation, a power failure causes a verification failure, and the simulation progress remains at 99%. As shown in picture, Now MPC5744 maintains this state every time it starts simulation. Who can help me solve this problem? in S32 Design Studio

When the MPC5744 starts simulation, a power failure causes a verification failure, and the simulation progress remains at 99%. As shown in picture, Now MPC5744 maintains this state every time it starts simulation. Who can help me solve this problem?

zengs2 — Thu, 04 Apr 2019 07:40:01 GMT

When the MPC5744 starts simulation, a power failure causes a verification failure, and the simulation progress remains at 99%. As shown in picture, Now MPC5744 maintains this state every time it starts simulation. Who can help me solve this problem?

Re: When the MPC5744 starts simulation, a power failure causes a verification failure, and the simulation progress remains at 99%. As shown in picture, Now MPC5744 maintains this state every time it starts simulation. Who can help me solve this problem?

yuqf — Wed, 12 Jun 2019 08:23:00 GMT

Could someone do some help for this question? I have met it too.

Re: When the MPC5744 starts simulation, a power failure causes a verification failure, and the simulation progress remains at 99%. As shown in picture, Now MPC5744 maintains this state every time it starts simulation. Who can help me solve this problem?

jiri_kral — Tue, 13 Aug 2019 08:00:01 GMT

This issue was probably caused by old PE Micro driver. Did you update it?

https://community.nxp.com/docs/DOC-342273

What is your S32DS Version?

Jiri

Re: When the MPC5744 starts simulation, a power failure causes a verification failure, and the simulation progress remains at 99%. As shown in picture, Now MPC5744 maintains this state every time it starts simulation. Who can help me solve this problem?

projectmahi4 — Wed, 05 Aug 2020 18:04:28 GMT

what is the simulation tool you are using

Re: When the MPC5744 starts simulation, a power failure causes a verification failure, and the simulation progress remains at 99%. As shown in picture, Now MPC5744 maintains this state every time it starts simulation. Who can help me solve this problem?

zengs2 — Thu, 06 Aug 2020 08:06:34 GMT

PE micro

Cyclone FX

When the flash is being erased, the MCU is powered off, which will cause the flash block verification to fail. After the flash is erased through the offline burner, it will become normal. This may be the flash verification protection mechanism of mpc5744 itself