S32 Design StudioのトピックRe: Cannot run program "make": Unknown reason

Cannot run program "make": Unknown reason

karl_jiang — Wed, 27 Jun 2018 14:49:27 GMT

I have build S32DS project in linux , but there were errors during build the project . console show the informations:

22:22:23 **** Build of configuration A53 for project MBMApp10 ****

make -j2 pre-build main-build

Cannot run program "make": Unknown reason

22:22:23 Build Finished (took 66ms)

The problem also show in some demos like apex_facedetetc_cv . It maybe the environment setting question or other? Hope for reply.

Re: Cannot run program "make": Unknown reason

jiri_kral — Mon, 02 Jul 2018 12:18:22 GMT

Hi,

are you able run make from command line? You can try it in your project/target. Here is output from my command line test:

Jiri

Re: Cannot run program "make": Unknown reason

karl_jiang — Tue, 03 Jul 2018 00:56:58 GMT

hi，Thank you for you replay and the command line executable in windows system . And the question: Cannot run program "make": Unknown reason was solved after I modify some configures of my linux system . And now it was showed no error during my run the demos of S32DS . But there was another question . For some demos like apex2_face_detection , apex2_orb_cv , apex2_roi_cv ... almost all apex demos which I run in S32DS for linux was just could build simulation successful but with no result . That means after the I run S32 application project for EMU , it could finished but not like in windows it will shows the result simulation (like some pictures which be processed in S32DS ) it was no result .

That make me feel very confused and hope for the replay ,thank you !