topic freemaster in S32 Design Studio

freemaster

dongfang — Wed, 01 Aug 2018 09:31:06 GMT

Hello Sir：

I use the MPC5744P chip，and install the freemaster sofware. Now，it can already communicate normally.But, i want to go further and use its active-X function. I use the example of user Manual about html.When I press the button, the interface will display an error message.Please help me to analyse . It would be better if you could provide a usable html routine.

Re: freemaster

petrfajmon-b173 — Thu, 02 Aug 2018 08:37:11 GMT

Hello dongfang‌,

please, can you share with me your FreeMASTER embedded and FreeMASTER PC projects for MPC5744P. It is difficult see the error reason.

Thank you,

Petr

Re: freemaster

dongfang — Thu, 02 Aug 2018 12:10:36 GMT

Hello Petr,

Thank you very much for your reply.Attachment is my project file.Please help analyze the cause of the error.

I want to change the value of the variable when I press the button.But I have tried it failed a few times.I hope you can provide the routine.Looking forward to your reply.

Thank you,

dong fang

Re: freemaster

dongfang — Tue, 14 Aug 2018 03:34:15 GMT

Hello Sir,

I want to use html to import the data from freemaster into the excel form. What should I do? Is there an example for easy access?

Re: freemaster

petrfajmon-b173 — Tue, 14 Aug 2018 12:55:50 GMT

Hello dongfang

look into the installed FreeMASTER Communication Driver (FreeMASTER Communication Driver) example for ActiveX access from Excel. The default path to the example is: c:\NXP\FreeMASTER_Serial_Communication_Driver_V2.0\examples\ActiveX_examples\Excel\freemaster_excel.xlsm

Best Regards,

Petr