S32V234 Sequencer Driver(seq.ko) issue

baijinlong — Tue, 06 Nov 2018 03:26:02 GMT

Dear ALL：

Our customer designed a S32V234 customt's board,and we have already patched the s32v234_sdk\os\linux patches.But when debugging the Sequencer Driver, after insmod seq.ko, the system reported an error:

We found that it was caused by the statement in Sequencer Driver in the following figure :

Clearing the KRAM region causes the system error.

At the same time we found such a passage in Sequencer_Driver_Software_User_Guide.pdf：

So，is it due to "security engine" causing an error when loading seq.ko?

If so, how do we burn the "security fuse"?

Is there any relevant documentation?

CPU: s32v234

Uboot:2016.01

Kernel:V4.1.26

BSP:Auto Linux BSP V17.0

SDK:VisionSDK S32V RTM1.2.0

Re: S32V234 Sequencer Driver(seq.ko) issue

mikedoidge — Tue, 06 Nov 2018 13:30:18 GMT

Hi baijinlong,

This is not the correct community to post S32V2 questions.

Moreover, we have stopped supporting S32V2 community group. But we still support S32V2 question using our ticketing system.

For future questions, please create the request at www.nxp.com/support using Support Requests option. Our experts will help you.

Thank you for understanding.

Regards,

Mike

topic S32V234 Sequencer Driver(seq.ko) issue in S32 Design Studio

S32V234 Sequencer Driver(seq.ko) issue

Re: S32V234 Sequencer Driver(seq.ko) issue