topic Re: Cannot run program "gdb": Launching failed in S32 Design Studio

Cannot run program "gdb": Launching failed

659306386 — Thu, 27 Sep 2018 02:08:00 GMT

S32 Design Studio for ARM Version 2018.R1 program fail.

Error with command: gdb --version
Cannot run program "gdb": Launching failed

Re: Cannot run program "gdb": Launching failed

jiri_kral — Thu, 27 Sep 2018 16:42:35 GMT

Hi,

what is your OS- Linux or Windows?

Re: Cannot run program "gdb": Launching failed

BlackNight — Fri, 28 Sep 2018 05:34:56 GMT

That error message typically indicates that the gdb executable is not found, see Troubleshooting Tips: Failed Debugging with GDB | MCU on Eclipse

I hope this helps,

Erich

Re: Cannot run program "gdb": Launching failed

alex_yu1 — Thu, 06 Dec 2018 07:45:24 GMT

i also have this problem， your solution is not working

Re: Cannot run program "gdb": Launching failed

raphael_sommer — Tue, 26 Feb 2019 13:20:06 GMT

Hello, I got the same issue.

Did you find a solution for that Problem?

Re: Cannot run program "gdb": Launching failed

stanish — Tue, 26 Feb 2019 14:26:55 GMT

Hi,

This issue may occur when the first debug is launched by clicking on the debug button and there was no debug configuration launched previously - Eclipse creates a new generic GDB configuration which is missing some important paths/settings required to run GDB client.

I'd suggest you to go the Debug Configuration dialog select correct debug configuration and press debug:

Hope it helps.

Stan

Re: Cannot run program "gdb": Launching failed

jiri_kral — Wed, 27 Feb 2019 08:50:49 GMT

Hi,

I faced similar issue couple weeks ago - in my case the issue was caused by different gcc (4.9 used for build) and gdb (6.3) version used for build/debug. You can use verbose build mode in project properties to check out in build console which particular version is really used:

Jiri

Re: Cannot run program "gdb": Launching failed

raphael_sommer — Tue, 05 Mar 2019 14:54:33 GMT

HI,

My Problem is gone now, thanks to you!