S32 Design StudioのトピックRe: Error in services launch sequence;when I debug MPC5748G

Error in services launch sequence;when I debug MPC5748G

1642280511 — Wed, 11 Jul 2018 08:49:13 GMT

I'm first time using S32DS,I am trying to program and debug MPC5748G using openSDA #example project
.but it was failed and give me some information as follows：

Is the hardware connection correct？

Can anyone, experienced same issue share how to resolve this?
is this known issue?

Re: Error in services launch sequence;when I debug MPC5748G

jiri_kral — Wed, 11 Jul 2018 09:35:26 GMT

Hi,

it looks like that there is no OpenSDA firmware on your board - the green LED next to RJ45 is flashing, isn't it?. Try to update it - https://community.nxp.com/docs/DOC-340263

Jiri

Re: Error in services launch sequence;when I debug MPC5748G

1642280511 — Thu, 12 Jul 2018 09:53:35 GMT

I have a question,when I'm debugging, I need 12v external power supply ?

Re: Error in services launch sequence;when I debug MPC5748G

jiri_kral — Thu, 12 Jul 2018 11:47:24 GMT

Hi,

no, you can use USB for power. Actually - with close look at your picture again - you have selected External power by J11 jumper. For USB power should be shorted pins 2-3.

Jiri