S32 Design StudioのトピックRe: MPC5777C update DCF record

MPC5777C update DCF record

markus_fischer1 — Mon, 15 Oct 2018 08:42:55 GMT

Hello,

I'm using S32 Design Studio for Power Architecture and the PE-Micro Debugger Tool (Multilink Universal FX).

For my board i need the external clock source from EXTAL pin. So I want to change this setting in the

UTEST Miscellaneous record.

I setup my toolchain like in this howto.

https://community.nxp.com/docs/DOC-334094

The DCF Startrecord is 0x00400300 and the next free is 0x00400308 from manual and memory view.

Flash-script: NXP_MPC5777C_1x32x4k_UTest.pcp

For my SRecord i use this Excel sheet:

https://community.nxp.com/docs/DOC-335523

This is my S32 record:

S30D00400308B008014001000000AD

If i try to debug, i get no error message, but the Memory is not filles with my data.

But if i use the Flash button, to Flash the new created configuration i get the following error message:

CMD>EM
Command is inactive for this .PCP file.
Error Erasing flash of device
Error occured during Flash programming.
AND:
Error during Flash programming. Terminating debug session.

I found this error always in this thread, but i don't have the Lauterbach Debugging tool, to use this solution.

https://community.nxp.com/message/1010145

Is there any other possible solution or fixit for this issue?

Re: MPC5777C update DCF record

jiri_kral — Mon, 15 Oct 2018 11:07:32 GMT

Hi,

I can reproduce your issue - it looks like that PE micro still didn't fix UTest flash algorithm. I already created ticket for this issue on May 04, 2018 and this ticket is still "In Progress" state.

I'll try find workaround and let you know.

Jiri

Re: MPC5777C update DCF record

markus_fischer1 — Mon, 15 Oct 2018 11:13:59 GMT

I have found new informations. I read in the PE-Micro Forum, that they don't want to fix this issue. See PDF

Re: MPC5777C update DCF record

jiri_kral — Mon, 15 Oct 2018 12:29:24 GMT

Hi,

it looks that using progppcnexus is the only option with PE Micro debug probe. You can download trial version here

PROGPPCNEXUS | Flash/EEPROM Programmer Software For NXP MPC55xx/56xx/57xx & STMicroelectronics SPC5 | PEmicro

Start progppcnexus.exe and connect to target:

Select the programming algorithm for UTest:

And select select your s-record:

You can check if record was added successfully back in S32DS Memory:

Strange is, that PE Micro won't fix the issue. In S32DS are used .dlls provided by them and there is no way how to fix it on our side.

Jiri

Re: MPC5777C update DCF record

markus_fischer1 — Tue, 16 Oct 2018 13:38:50 GMT

This is very strange. But this work for me.

Thank you!

Re: MPC5777C update DCF record

klimmmike123456 — Sat, 13 Apr 2019 08:22:05 GMT

I use the mpc5748G board.
I tried the method provided by Jiri, but it didn't work.

Screenshot in the following:

If I press the verify module

If I press the program module

So I still can't write DCF to mpc5748g until now.

Can you help me solve this problem?

by the way

I use the mpc5748G board.

This is my S32 record: S30D0040035800002297010000009D

(For my SRecord i use this Excel sheet:https://community.nxp.com/docs/DOC-341540)

I am using this flash programming algorithm: NXP_MPC5748G_1x32x4k_UTest.pcp

CAN I update DCF record for SPC5744P

zhangzhixing — Mon, 09 Jun 2025 03:06:47 GMT

I downloaded the trial version of PROGPPCNEXUS and attempted to program the JTAG password at address 0x00400200 for SPC5744P. However, the trial version doesn't provide an erase function. When using the program module command, the JTAG password content appears to be a combination of the default value and my new value.

My questions are:

Is the JTAG password address (0x00400200) erasable?
Should I purchase the paid version of PROGPPCNEXUS to access the erase functionality?