Debug problem

huanliu — Thu, 17 May 2018 03:07:55 GMT

Hi,

I'm working on flashing with MPC5775 using P&E multilink and S32.

When the program is debugged, the program cannot be downloaded.

like this:

Connection from "127.0.0.1" via 127.0.0.1
Copyright 2017 P&E Microcomputer Systems,Inc.
Command Line :D:\NXP_S32\install\eclipse\plugins\com.pemicro.debug.gdbjtag.ppc_1.7.3.201803261737\win32\pegdbserver_power_console -device=MPC5775K -startserver -singlesession -serverport=7224 -gdbmiport=6224 -interface=USBMULTILINK -speed=2500 -port=USB18

CMD>RE

Initializing.
MPC577xK Device detected.
Target has been RESET and is active.
CMD>CM D:\NXP_S32\install\eclipse\plugins\com.pemicro.debug.gdbjtag.ppc_1.7.3.201803261737\win32\gdi\P&E\nxp_mpc5775k_1x32x1000k_cflash_cut2.pcp

Initializing.
MPC577xK Device detected.
Initialized.

;version 1.06, 12/13/2016, Copyright P&E Microcomputer Systems, www.pemicro.com [5775K_3.9meg_cut2]

;device NXP, MPC5775K, 1x32x1000k, desc=CFlash_cut2

;begin_cs device=$00F98000, length=$003E8000, ram=$40000000

Loading programming algorithm ...

WARNING - Selected .PCP file has been modified. CRC16 = $E915
Done.
Programming sequency is : erase, blank check, program, and verify {default}
CMD>VC
Verifying object file CRC-16 to device ranges ...
block 00FA0000-00FA0007 ...
Ok.
block 01000000-010001FD ...

then download program stops here.

Please give some feedback to resolve this issue.

Re: Debug problem

jiri_kral — Mon, 21 May 2018 12:21:28 GMT

Hi,

I flashed test project and there is no issue on my side. Can you please share your project or elf (or srec) files?

Jiri

S32 Design Studio中的主题 Debug problem

Debug problem

Re: Debug problem