S32 Design Studio 1.2 to 2017.R1 - SPT assembler failures

markthompson170 — Thu, 25 Jan 2018 20:27:02 GMT

I have updated to S32 Design Studio 2017.R1 (From 1.2) and it seems that most of the SPT assembler is now broken/nonfunctional ?

Has there been a change in the syntax ?

All my SPT asm code that was running fine on the older version is now having build errors.

Also the SPT graph is totally non-operational. See errors at bottom of message.

Thanks

Mark

Example code:

SPT_CACHE_Test_1:

// Copy from SysRam to OpRam then Back to SysRam

pdma .signext .notag .16real .sysram2opram .async 0x080 0xDEADDEAD, 0x8000, 0, 1, 0, 1

pdma .signext .notag .16real .opram2sysram .sync 0x080 0xDEADDEAD, 0x8000, 0, 1, 0, 1

sync

stop

Error reported:

Description Resource Path Location Type

pdma .signext .notag .16real .sysram2opram .async 0x080 0xDEADBEEF,0x8000,0,1,0,1:

No version of instruction pdma matched the given arguments.

I’m getting these errors for all these instructions:

pdma

pdma.ind

rdx4/rdx2

maxs

fir

No errors for these instructions

Add

Wait

Set

Get

Loop

sync

Stop

S32 Design Studio for Power Architecture

Version: 2017.R1

Build id: 171018

SPT Graph errors:

Failed to create the part's controls

java.lang.NullPointerException

at org.eclipse.sirius.diagram.business.internal.experimental.sync.DDiagramSynchronizer.getAllMandatoriesAdditionalLayers(DDiagramSynchronizer.java:344)

at org.eclipse.sirius.diagram.business.internal.experimental.sync.DDiagramSynchronizer.activateNewMandatoryAdditionalLayers(DDiagramSynchronizer.java:311)

at org.eclipse.sirius.diagram.business.internal.experimental.sync.DDiagramSynchronizer.refreshOperation(DDiagramSynchronizer.java:373)

at org.eclipse.sirius.diagram.business.internal.experimental.sync.DDiagramSynchronizer.refresh(DDiagramSynchronizer.java:356)

at org.eclipse.sirius.diagram.business.internal.sync.DDiagramSynchronizer.refresh(DDiagramSynchronizer.java:91)

at org.eclipse.sirius.diagram.business.internal.dialect.DiagramDialectServices.refresh(DiagramDialectServices.java:271)

at org.eclipse.sirius.business.internal.dialect.DialectManagerImpl.refresh(DialectManagerImpl.java:115)

at org.eclipse.sirius.business.internal.dialect.DialectManagerImpl.refresh(DialectManagerImpl.java:106)

at org.eclipse.sirius.diagram.ui.business.internal.command.RefreshDiagramOnOpeningCommand.doExecute(RefreshDiagramOnOpeningCommand.java:62)

at org.eclipse.emf.transaction.RecordingCommand.execute(RecordingCommand.java:135)

at org.eclipse.emf.common.command.CompoundCommand.execute(CompoundCommand.java:261)

at org.eclipse.emf.workspace.EMFCommandOperation.doExecute(EMFCommandOperation.java:119)

at org.eclipse.emf.workspace.AbstractEMFOperation.execute(AbstractEMFOperation.java:150)

at org.eclipse.core.commands.operations.DefaultOperationHistory.execute(DefaultOperationHistory.java:488)

at org.eclipse.emf.workspace.impl.WorkspaceCommandStackImpl.doExecute(WorkspaceCommandStackImpl.java:208)

at org.eclipse.emf.transaction.impl.AbstractTransactionalCommandStack.execute(AbstractTransactionalCommandStack.java:165)

at org.eclipse.emf.transaction.impl.AbstractTransactionalCommandStack.execute(AbstractTransactionalCommandStack.java:219)

at org.eclipse.sirius.diagram.ui.tools.internal.editor.DDiagramEditorImpl.launchRefresh(DDiagramEditorImpl.java:1253)

at org.eclipse.sirius.diagram.ui.tools.internal.editor.DDiagramEditorImpl.initializeGraphicalViewer(DDiagramEditorImpl.java:1435)

at org.eclipse.sirius.diagram.ui.tools.internal.editor.DDiagramEditorImpl.createOriginalGraphicalViewer(DDiagramEditorImpl.java:1392)

at org.eclipse.sirius.diagram.ui.tools.internal.editor.DDiagramEditorImpl.createMainDiagramSection(DDiagramEditorImpl.java:1318)

at org.eclipse.sirius.diagram.ui.tools.internal.editor.DDiagramEditorImpl.createGraphicalViewer(DDiagramEditorImpl.java:1307)

at org.eclipse.gef.ui.parts.GraphicalEditor.createPartControl(GraphicalEditor.java:171)

at org.eclipse.gmf.runtime.diagram.ui.parts.DiagramEditor.createPartControl(DiagramEditor.java:1580)

at org.eclipse.gmf.runtime.diagram.ui.parts.DiagramEditorWithFlyOutPalette.createPartControl(DiagramEditorWithFlyOutPalette.java:328)

at org.eclipse.gmf.runtime.diagram.ui.resources.editor.parts.DiagramDocumentEditor.createPartControl(DiagramDocumentEditor.java:1514)

at org.eclipse.sirius.diagram.ui.tools.internal.editor.DDiagramEditorImpl.createPartControl(DDiagramEditorImpl.java:509)

at org.eclipse.ui.internal.e4.compatibility.CompatibilityPart.createPartControl(CompatibilityPart.java:150)

at org.eclipse.ui.internal.e4.compatibility.CompatibilityEditor.createPartControl(CompatibilityEditor.java:99)

at org.eclipse.ui.internal.e4.compatibility.CompatibilityPart.create(CompatibilityPart.java:340)

at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)

at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)

at java.lang.reflect.Method.invoke(Unknown Source)

at org.eclipse.e4.core.internal.di.MethodRequestor.execute(MethodRequestor.java:55)

at org.eclipse.e4.core.internal.di.InjectorImpl.processAnnotated(InjectorImpl.java:966)

at org.eclipse.e4.core.internal.di.InjectorImpl.processAnnotated(InjectorImpl.java:931)

at org.eclipse.e4.core.internal.di.InjectorImpl.inject(InjectorImpl.java:151)

at org.eclipse.e4.core.internal.di.InjectorImpl.internalMake(InjectorImpl.java:375)

at org.eclipse.e4.core.internal.di.InjectorImpl.make(InjectorImpl.java:294)

at org.eclipse.e4.core.contexts.ContextInjectionFactory.make(ContextInjectionFactory.java:162)

at org.eclipse.e4.ui.internal.workbench.ReflectionContributionFactory.createFromBundle(ReflectionContributionFactory.java:105)

at org.eclipse.e4.ui.internal.workbench.ReflectionContributionFactory.doCreate(ReflectionContributionFactory.java:74)

at org.eclipse.e4.ui.internal.workbench.ReflectionContributionFactory.create(ReflectionContributionFactory.java:56)

at org.eclipse.e4.ui.workbench.renderers.swt.ContributedPartRenderer.createWidget(ContributedPartRenderer.java:129)

at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine.createWidget(PartRenderingEngine.java:975)

at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine.safeCreateGui(PartRenderingEngine.java:651)

at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine.safeCreateGui(PartRenderingEngine.java:757)

at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine.access$0(PartRenderingEngine.java:728)

at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine$2.run(PartRenderingEngine.java:722)

at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)

at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine.createGui(PartRenderingEngine.java:706)

at org.eclipse.e4.ui.internal.workbench.PartServiceImpl.createElement(PartServiceImpl.java:1257)

at org.eclipse.e4.ui.internal.workbench.PartServiceImpl.showPart(PartServiceImpl.java:1218)

at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:401)

at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:290)

at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:3213)

at org.eclipse.ui.internal.WorkbenchPage.access$25(WorkbenchPage.java:3176)

at org.eclipse.ui.internal.WorkbenchPage$10.run(WorkbenchPage.java:3158)

at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)

at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:3153)

at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:3117)

at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:3098)

at org.eclipse.sirius.diagram.ui.business.internal.dialect.DiagramDialectUIServices$1.run(DiagramDialectUIServices.java:208)

at org.eclipse.swt.widgets.Synchronizer.syncExec(Synchronizer.java:233)

at org.eclipse.ui.internal.UISynchronizer.syncExec(UISynchronizer.java:145)

at org.eclipse.swt.widgets.Display.syncExec(Display.java:4821)

at org.eclipse.sirius.common.ui.tools.api.util.EclipseUIUtil.displaySyncExec(EclipseUIUtil.java:336)

at org.eclipse.sirius.diagram.ui.business.internal.dialect.DiagramDialectUIServices.openEditor(DiagramDialectUIServices.java:218)

at org.eclipse.sirius.diagram.ui.business.internal.dialect.DiagramDialectUIServices.openEditor(DiagramDialectUIServices.java:179)

at org.eclipse.sirius.ui.business.internal.dialect.DialectUIManagerImpl.openEditor(DialectUIManagerImpl.java:95)

at com.nxp.s32ds.vgt.ide.ui.actions.OpenRepresenatationAction$1.runInUIThread(OpenRepresenatationAction.java:52)

at org.eclipse.ui.progress.UIJob$1.run(UIJob.java:97)

at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)

at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:182)

at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:4211)

at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3827)

at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine$4.run(PartRenderingEngine.java:1121)

at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:336)

at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine.run(PartRenderingEngine.java:1022)

at org.eclipse.e4.ui.internal.workbench.E4Workbench.createAndRunUI(E4Workbench.java:150)

at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:693)

at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:336)

at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:610)

at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:148)

at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:138)

at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)

at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:134)

at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:104)

at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:388)

at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:243)

at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)

at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)

at java.lang.reflect.Method.invoke(Unknown Source)

at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:673)

at org.eclipse.equinox.launcher.Main.basicRun(Main.java:610)

at org.eclipse.equinox.launcher.Main.run(Main.java:1519)

Re: S32 Design Studio 1.2 to 2017.R1 - SPT assembler failures

markthompson170 — Fri, 26 Jan 2018 17:26:34 GMT

Update: SPT graph failure was caused by Project_Z4.aird file had a old project path that does not exist.

Manually changing the path to the current workspace fixed the problem. Why the import / update process

didn't pick this up i don't know.

SPT assembler seems to be pointed to the wrong assembler, it seem to be the SPT 1.x assembler.

I can command line assemble the code using the 2.0 and 2.5 assembler. the 1.x creates the errors.

The path to the assembler should be

SPT Tool Path ${SPT2_TOOLCHAIN_DIR}/bin

in the settings, but it seems to be ignored.

I can find any place where SPT2_TOOLCHAIN_DIR is defined.

Hard coded it to C:\NXP\S32DS_Power_v2017.R1\S32DS\SPT2.5\bin, but still the same problem.

It seems some setting/configuration in the project is pointing it to the SPT 1.x assembler.

This what is in the path. It's not tracking the project settings.
C:\NXP\S32DS_Power_v2 017.R1\eclipse\..\S32DS\SPT\bin;

Problem found: You must reboot your windows box, it seems that S32DS updates the PATH and it is out of date utill you reboot. After the reboot the SPT assembler issue went away.

Re: S32 Design Studio 1.2 to 2017.R1 - SPT assembler failures

mchavosh — Mon, 19 Aug 2019 15:18:25 GMT

Hi,

I have work with S32DS power architecture V1.1. When I was upgrade my S32DS to version 1.2 I have a lot of SPT errors such as:

all of them related to No version is matched

My SPT is an assembly code. It seems that the SPT versions does not matched. The above path and comments are not clear for me. Where should I change the SPT path or version? Is there any setting in the project to change it?

Thanks

Re: S32 Design Studio 1.2 to 2017.R1 - SPT assembler failures

markthompson170 — Tue, 20 Aug 2019 14:07:16 GMT

I don’t think it’s a path issue, I think it is a slight change in the format of the RDX2 instruction.

Try formatting like this, this is working for me.

rdx2 .cmplx .no_repeat .qext .noovs .round3 .nosft .nosplit CHIRPS_PER_FRAME 0x9000, 0x8000, TWI_ADDR_128_UNIF, 1, 1

Mark

topic Re: S32 Design Studio 1.2 to 2017.R1 - SPT assembler failures in S32 Design Studio

S32 Design Studio 1.2 to 2017.R1 - SPT assembler failures

Re: S32 Design Studio 1.2 to 2017.R1 - SPT assembler failures

Re: S32 Design Studio 1.2 to 2017.R1 - SPT assembler failures

Re: S32 Design Studio 1.2 to 2017.R1 - SPT assembler failures