topic S32 DS for power v1.2 debug connect target fail in S32 Design Studio https://community.nxp.com/t5/S32-Design-Studio/S32-DS-for-power-v1-2-debug-connect-target-fail/m-p/755261#M2687 <HTML><HEAD></HEAD><BODY><P>chip:MPC5748G,tool:PE Micro Multilink,we used only 7 pins(<SPAN lang="EN-US" style="color: #1f497d; background-color: #ffffff; font-size: 10.5pt;">TDI,</SPAN><SPAN lang="EN-US" style="color: #1f497d; background-color: #ffffff; font-size: 10.5pt;">TDO,</SPAN><SPAN lang="EN-US" style="color: #1f497d; background-color: #ffffff; font-size: 10.5pt;">TCLK,</SPAN><SPAN lang="EN-US" style="color: #1f497d; background-color: #ffffff; font-size: 10.5pt;">Vref,</SPAN><SPAN lang="EN-US" style="color: #1f497d; background-color: #ffffff; font-size: 10.5pt;">TMS, GND</SPAN><SPAN style="background-color: #ffffff; color: #000000; font-size: 10.5pt;">,<SPAN style="color: #1f497d; background-color: #ffffff;">RESET</SPAN></SPAN>) of JTAG.S32 can perform a new created empty project with counter++,but can not perform example projects,the error information is that the target may have entered reset escalation,please power cycle the board.</P></BODY></HTML> Tue, 07 Nov 2017 11:13:37 GMT 信民熊 2017-11-07T11:13:37Z S32 DS for power v1.2 debug connect target fail https://community.nxp.com/t5/S32-Design-Studio/S32-DS-for-power-v1-2-debug-connect-target-fail/m-p/755261#M2687 <HTML><HEAD></HEAD><BODY><P>chip:MPC5748G,tool:PE Micro Multilink,we used only 7 pins(<SPAN lang="EN-US" style="color: #1f497d; background-color: #ffffff; font-size: 10.5pt;">TDI,</SPAN><SPAN lang="EN-US" style="color: #1f497d; background-color: #ffffff; font-size: 10.5pt;">TDO,</SPAN><SPAN lang="EN-US" style="color: #1f497d; background-color: #ffffff; font-size: 10.5pt;">TCLK,</SPAN><SPAN lang="EN-US" style="color: #1f497d; background-color: #ffffff; font-size: 10.5pt;">Vref,</SPAN><SPAN lang="EN-US" style="color: #1f497d; background-color: #ffffff; font-size: 10.5pt;">TMS, GND</SPAN><SPAN style="background-color: #ffffff; color: #000000; font-size: 10.5pt;">,<SPAN style="color: #1f497d; background-color: #ffffff;">RESET</SPAN></SPAN>) of JTAG.S32 can perform a new created empty project with counter++,but can not perform example projects,the error information is that the target may have entered reset escalation,please power cycle the board.</P></BODY></HTML> Tue, 07 Nov 2017 11:13:37 GMT https://community.nxp.com/t5/S32-Design-Studio/S32-DS-for-power-v1-2-debug-connect-target-fail/m-p/755261#M2687 信民熊 2017-11-07T11:13:37Z Re: S32 DS for power v1.2 debug connect target fail https://community.nxp.com/t5/S32-Design-Studio/S32-DS-for-power-v1-2-debug-connect-target-fail/m-p/755262#M2688 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>could you please measure reset signal after power on reset and attach it into this thread?</P><P></P><P>Regards,</P><P>Martin</P></BODY></HTML> Tue, 07 Nov 2017 13:37:36 GMT https://community.nxp.com/t5/S32-Design-Studio/S32-DS-for-power-v1-2-debug-connect-target-fail/m-p/755262#M2688 martin_kovar 2017-11-07T13:37:36Z