S32 Design Studio中的主题 Start with debug vs flash https://community.nxp.com/t5/S32-Design-Studio/Start-with-debug-vs-flash/m-p/751741#M2633 <HTML><HEAD></HEAD><BODY><P>Hi, I have a somewhat rudimentary question....is there any difference in what is flashed&nbsp; depending on if I use the "Debug Configuration" och "Flash from file". Is there additional content flashed for the debugging to work?</P><P></P><P>Thanks,</P><P>Cecilia</P></BODY></HTML> Tue, 05 Jun 2018 10:32:52 GMT ceciliac 2018-06-05T10:32:52Z Start with debug vs flash https://community.nxp.com/t5/S32-Design-Studio/Start-with-debug-vs-flash/m-p/751741#M2633 <HTML><HEAD></HEAD><BODY><P>Hi, I have a somewhat rudimentary question....is there any difference in what is flashed&nbsp; depending on if I use the "Debug Configuration" och "Flash from file". Is there additional content flashed for the debugging to work?</P><P></P><P>Thanks,</P><P>Cecilia</P></BODY></HTML> Tue, 05 Jun 2018 10:32:52 GMT https://community.nxp.com/t5/S32-Design-Studio/Start-with-debug-vs-flash/m-p/751741#M2633 ceciliac 2018-06-05T10:32:52Z Re: Start with debug vs flash https://community.nxp.com/t5/S32-Design-Studio/Start-with-debug-vs-flash/m-p/751742#M2634 <HTML><HEAD></HEAD><BODY><P>Hi,&nbsp;</P><P></P><P>The way how you upload your program into Flash has no effect on debug ability. The question is - if your output .elf file contain debug info (-g option) or not.&nbsp;</P><P></P><P>The additional content is added by your debugger - PE Micro or any other. With flashing from file you need o attach to running target. With debug configuration is started debug session.&nbsp;</P><P></P><P>Jiri&nbsp;</P></BODY></HTML> Tue, 05 Jun 2018 13:03:41 GMT https://community.nxp.com/t5/S32-Design-Studio/Start-with-debug-vs-flash/m-p/751742#M2634 jiri_kral 2018-06-05T13:03:41Z