S32 Design StudioのトピックS32DS connect PE Multilink

S32DS connect PE Multilink

ronliu — Mon, 29 Feb 2016 02:43:10 GMT

Hi all,

I have a problem when I'm using S32DS to debug a MPC5x project.

As the pictures show, I don't know why the S32DS aren't able to connect the PE multilink. But it worked well before. This strange problem comes to me only the week. Could you please give me some introduction？

Thanks all.m

Best regards，

Ron

Re: S32DS connect PE Multilink

martin_kovar — Mon, 29 Feb 2016 08:42:25 GMT

Hi,

try to download the newest drivers and update you debugger. Here is the URL:

http://www.pemicro.com/support/download_processor.cfm

Download and install this file:

P&E Hardware Interface Drivers, Version 12 (Win XP/Vista/7/8/10)

Also look at this thread and try to use the procedure which advises Stanislav.

Eternal "configuring GDB" if P&E Multilink not connected or target OFF

Regards,

Martin

Re: S32DS connect PE Multilink

ronliu — Mon, 29 Feb 2016 12:56:22 GMT

Martin,

Thanks. I create a new project and copy all my code into it. And then the problem is solved.

It seems very strange. But It really works.

Regards,

Ron