S32 Design StudioのトピックRe: Failure for OpenSDA interface https://community.nxp.com/t5/S32-Design-Studio/Failure-for-OpenSDA-interface/m-p/715274#M2009 <HTML><HEAD></HEAD><BODY><P>Hi,&nbsp;</P><P></P><P>did you checked out the power? Are all three green LEDs at the end with Ethernet connector ON? If not and you are powering the board from USB - switch the Jumper (there is only one) to position close to ETH connector.&nbsp;</P><P></P><P></P><P></P><P>Jiri&nbsp;</P></BODY></HTML> Tue, 10 Apr 2018 07:01:19 GMT jiri_kral 2018-04-10T07:01:19Z Failure for OpenSDA interface https://community.nxp.com/t5/S32-Design-Studio/Failure-for-OpenSDA-interface/m-p/715273#M2008 <HTML><HEAD></HEAD><BODY><P>I am a new user for S32DS and trying to use S32DS Power and MPC5748G DevKit Board with OpenSDA interface to debug the "hello+pll". However, there was an error that the device could not be found as shown in the following pictrues.</P><P><span class="lia-inline-image-display-wrapper" image-alt="2.png"><img src="https://community.nxp.com/t5/image/serverpage/image-id/590i9B59EEFB8B646428/image-size/large?v=v2&amp;px=999" role="button" title="2.png" alt="2.png" /></span><span class="lia-inline-image-display-wrapper" image-alt="3.png"><img src="https://community.nxp.com/t5/image/serverpage/image-id/632i7AF638B9425F8896/image-size/large?v=v2&amp;px=999" role="button" title="3.png" alt="3.png" /></span></P><P></P><P>what's more, the version is shown as following:</P><P><span class="lia-inline-image-display-wrapper" image-alt="1.png"><img src="https://community.nxp.com/t5/image/serverpage/image-id/633i58A665A00C684EAD/image-size/large?v=v2&amp;px=999" role="button" title="1.png" alt="1.png" /></span></P><P></P><DIV class=""><DIV><FORM enctype="application/x-www-form-urlencoded" name="text_form"><DIV><DIV><DIV><DIV><DIV class=""><DIV><DIV><DIV><DIV><DIV dir="ltr"><SPAN class="" lang="en"><SPAN>In addition to this problem, I do not know where to learn the specific operation of debugging. Hope to get help form yours. Thank you!</SPAN></SPAN></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV></FORM></DIV></DIV></BODY></HTML> Mon, 09 Apr 2018 08:29:04 GMT https://community.nxp.com/t5/S32-Design-Studio/Failure-for-OpenSDA-interface/m-p/715273#M2008 hrfbit 2018-04-09T08:29:04Z Re: Failure for OpenSDA interface https://community.nxp.com/t5/S32-Design-Studio/Failure-for-OpenSDA-interface/m-p/715274#M2009 <HTML><HEAD></HEAD><BODY><P>Hi,&nbsp;</P><P></P><P>did you checked out the power? Are all three green LEDs at the end with Ethernet connector ON? If not and you are powering the board from USB - switch the Jumper (there is only one) to position close to ETH connector.&nbsp;</P><P></P><P></P><P></P><P>Jiri&nbsp;</P></BODY></HTML> Tue, 10 Apr 2018 07:01:19 GMT https://community.nxp.com/t5/S32-Design-Studio/Failure-for-OpenSDA-interface/m-p/715274#M2009 jiri_kral 2018-04-10T07:01:19Z Re: Failure for OpenSDA interface https://community.nxp.com/t5/S32-Design-Studio/Failure-for-OpenSDA-interface/m-p/715275#M2010 <HTML><HEAD></HEAD><BODY><P>Please check this thread:</P><P><A _jive_internal="true" class="link-titled" href="https://community.nxp.com/message/997461#comment-1003570" title="https://community.nxp.com/message/997461#comment-1003570">https://community.nxp.com/message/997461#comment-1003570</A>&nbsp;</P></BODY></HTML> Wed, 11 Apr 2018 21:59:13 GMT https://community.nxp.com/t5/S32-Design-Studio/Failure-for-OpenSDA-interface/m-p/715275#M2010 stanish 2018-04-11T21:59:13Z