S32 Design StudioのトピックRe: S32DS 3.6.7 RTD 7.0.1 P02 HSE code generation error

S32DS 3.6.7 RTD 7.0.1 P02 HSE code generation error

wodudwo — Tue, 14 Jul 2026 09:24:27 GMT

I am trying to generate the HSE-related RTD code for S32K358 using S32DS 3.6.7, but I have encountered an issue.

First, I installed the following Update Sites in the order shown below:

SW32K3_S32M27x_RTD_R23-11_7.0.1_D2603_DesignStudio_updatesite.zip
SW32K3_RTD_R23-11_7.0.1_P02_D2603_DesignStudio_updatesite.zip

The installation status is shown in the image below.

Next, I created a new project by selecting the SDK shown below.

Then, I added the BaseNXP and Hse components in Config Tools as shown below.

However, the following validation error occurs:

Issue: Hse is not found in the toolchain/IDE project. The project will not compile!
Level: Error 
Type: Validation 
Tool: Toolchain/IDE project 
Origin: Peripherals 
Target: Toolchain/IDE project: M7_0_0 
Resource: platform.driver.Hse

How can I resolve this issue and successfully generate the HSE-related RTD code?

Re: S32DS 3.6.7 RTD 7.0.1 P02 HSE code generation error

VaneB — Tue, 14 Jul 2026 20:06:15 GMT

Hi @wodudwo

To verify that there are no missing software packages, could you please compare the packages installed in your IDE with those shown in the following image?

Additionally, let's try uninstalling all packages related to S32K3 RTD and then reinstall only the packages that contain "P02" in their name.

BR, VaneB

Re: S32DS 3.6.7 RTD 7.0.1 P02 HSE code generation error

wodudwo — Wed, 15 Jul 2026 00:27:52 GMT

Hello,
I tried generating the code with the following package installed, but I still encounter the same validation error.

As you suggested, I first uninstalled all RTD-related extensions and then installed only the following package:

- SW32K3_RTD_R23-11_7.0.1_P02_D2603_DesignStudio_updatesite.zip

The installation status is shown below.

However, after doing this, I can no longer select any SDK when creating a new project, as shown in the image below.

What should I do to resolve this issue?

Re: S32DS 3.6.7 RTD 7.0.1 P02 HSE code generation error

VaneB — Wed, 15 Jul 2026 22:23:43 GMT

Hi @wodudwo

I believe one of the installation steps may be missing. Below is the procedure I use to install the packages successfully:

Since you have already installed some packages, I recommend first uninstalling all packages related to RTD for S32K3 devices, including the S32 Configuration Tools R1.8 NPI Data Package for S32K3 and S32M devices, as these have dependencies on the RTD packages.

- Add the following update sites:

SW32K3_S32M27x_RTD_R23-11_7.0.1_D2603_DesignStudio_updatesite.zip
SW32K3_RTD_R23-11_7.0.1_P02_D2603_DesignStudio_updatesite.zip
SW32K3_RTD_R23-11_7.0.1_P02_D2603_DesignStudio_updatesite_updated_D20260630.zip

- Select and install only the packages that contain P02 in their name. Allow S32DS to automatically select and install any additional dependent packages required for the installation.

- Wait for the installation to complete successfully and allow S32DS to restart.

- After the restart, select and install all S32 Configuration Tools R1.8 NPI Data Package for S32K3 and S32M devices components. Again, allow S32DS to automatically select any required dependencies.

- Wait for the installation to complete successfully and allow S32DS to restart once more.

After following these steps, I end up with six RTD 7.0.1 packages (including P02) installed in my IDE. With this setup, I am able to add the HSE drivers to my projects without any issues.