https://community.nxp.com/t5/S32-Design-Studio/SKEAZ128-ADC/m-p/2345919#M14163 <P>Hello&nbsp;<a href="https://community.nxp.com/t5/user/viewprofilepage/user-id/259390">@Chethana</a>&nbsp;,</P> <DIV>Is there still any issue at the moment? If you need further assistance, please let me know, I’d be happy to help.</DIV> <DIV>&nbsp;</DIV> <DIV>BR</DIV> <DIV>Celeste</DIV> Tue, 07 Apr 2026 02:40:59 GMT Celeste_Liu 2026-04-07T02:40:59Z https://community.nxp.com/t5/S32-Design-Studio/SKEAZ128-ADC/m-p/2303738#M14046 <P>I am trying configure the ADC on the board fdrm-skeaz128, the library is&nbsp;SKEAZ1284.h. The pin i am focusing on is PTA0. My problem is, i am giving a DC voltage (currently) 2.7V, but after the conversion the value i am getting is 1.8. Its the same with all voltages less than the reference voltage, when more than ref, i am getting 3.3V. I have tried with all resolutions. Any one plz do give some insights on this. I have given the main and adc init codes below.</P> Fri, 30 Jan 2026 11:40:38 GMT https://community.nxp.com/t5/S32-Design-Studio/SKEAZ128-ADC/m-p/2303738#M14046 Chethana 2026-01-30T11:40:38Z https://community.nxp.com/t5/S32-Design-Studio/SKEAZ128-ADC/m-p/2345919#M14163 <P>Hello&nbsp;<a href="https://community.nxp.com/t5/user/viewprofilepage/user-id/259390">@Chethana</a>&nbsp;,</P> <DIV>Is there still any issue at the moment? If you need further assistance, please let me know, I’d be happy to help.</DIV> <DIV>&nbsp;</DIV> <DIV>BR</DIV> <DIV>Celeste</DIV> Tue, 07 Apr 2026 02:40:59 GMT https://community.nxp.com/t5/S32-Design-Studio/SKEAZ128-ADC/m-p/2345919#M14163 Celeste_Liu 2026-04-07T02:40:59Z