topic Re: S32DS3.6.6 Lauterbach plugin returns error message in S32 Design Studio

S32DS3.6.6 Lauterbach plugin returns error message

DirkEtzler — Wed, 25 Mar 2026 14:00:23 GMT

When using the indicated "Lauterbach" button below within S32DS3.6.6., S32Ds throws an error (exception) message. Where can I find more information on what the error message means and how to resolve this issue?

Re: S32DS3.6.6 Lauterbach plugin returns error message

Julián_AragónM — Wed, 25 Mar 2026 20:08:04 GMT

Hi @DirkEtzler,

Do you have a valid TRACE32 installation? T32 plugin directly calls your local installation, you can refer to the debug configurations:

You can refer to TRACE32 documentation: TRACE32 Integration to Eclipse.

Best regards,
Julián

Re: S32DS3.6.6 Lauterbach plugin returns error message

DirkEtzler — Thu, 26 Mar 2026 10:22:29 GMT

Hello @Julián_AragónM,

yes, I do have a valid T32 installation and license. However, the T32 sits at a non-standard location (e.g., not under C:\T32). Let me check the documentation in the mentioned link and see if there is guidance on my topic.

Re: S32DS3.6.6 Lauterbach plugin returns error message

Julián_AragónM — Thu, 26 Mar 2026 15:57:33 GMT

Hi @DirkEtzler,

Try changing the paths under your debug configuration to the actual T32 location. The error you've shared mostly appears when there is no valid T32 installation detected.

Best regards,
Julián

Re: S32DS3.6.6 Lauterbach plugin returns error message

DirkEtzler — Thu, 26 Mar 2026 18:24:25 GMT

Hello @Julián_AragónM,

My specific debug configurations are working fine. I have corrected the S32DS path variable for T32 and also edited the corresponding configuration file. With these changes my Lauterbach is called and the control is transferred over to Lauterbach.

I was just specifically interested what this LB button is being used for and why it is throwing an error?

I will see if Lauterbach can educate me on their plug-in. Thank you so far.