S32 Design StudioのトピックRe: What is the mpc 5777c microcontroller flash programming tool

What is the mpc 5777c microcontroller flash programming tool

192064963 — Tue, 02 Sep 2025 06:00:33 GMT

hi, What is the mpc 5777c microcontroller flash programming tool? I did not find a flash programming tool for the MPC5777c processor. thsanks

Re: What is the mpc 5777c microcontroller flash programming tool

192064963 — Tue, 02 Sep 2025 06:16:22 GMT

Does the S32 Flash Tool 2.3.3 tool is support MPC5777C microcontrollers.

Re: What is the mpc 5777c microcontroller flash programming tool

davidtosenovjan — Tue, 02 Sep 2025 11:24:09 GMT

No, following devices are supported.

2.3 Supported devices
Flash Tool provides support for the following NXP devices:
• S32R41
• S32R45
• S32G2xx
• S32G3xx
• SAF85xx
• SAF86xx
• S32R47
• S32N5
• S32Z2/E2

Re: What is the mpc 5777c microcontroller flash programming tool

davidtosenovjan — Tue, 02 Sep 2025 12:20:56 GMT

Along with recommendations from our website below you could also take a look on third party providers’ website:

https://www.segger.com

http://www.lauterbach.com

http://www.pemicro.com

https://www.pls-mc.com

Also I could point out to some other solution of production programming (direct programming of MCU over ZIF socket):

https://www.elnec.com

Regarding S32DS 2.1 - it natively supports P&E Multilink/Cyclone/OpenSDA.

Lauterbach, iSystem, and PLS can be supported by plugin:
https://community.nxp.com/t5/S32-Design-Studio-Knowledge-Base/S32-Design-Studio-for-Power-Architecture-v2-1-Windows-Linux/ta-p/1123875

Re: What is the mpc 5777c microcontroller flash programming tool

192064963 — Wed, 03 Sep 2025 02:48:18 GMT

Thank you for your reply. We now need to provide the customer with a .bin file burning program. We don't want to give them the source code. However, S32DS 2.1 requires a code project to compile and download. Are there any other ways to directly download the .bin file?

Re: What is the mpc 5777c microcontroller flash programming tool

davidtosenovjan — Mon, 08 Sep 2025 16:02:16 GMT

https://community.nxp.com/t5/S32-Design-Studio-Knowledge-Base/HOWTO-download-separate-elf-srec-hex-file-to-microcontroller/ta-p/1127159

Usually we use .elf or .srec for these purposes. .bin is is not usually used with modern MCUs.

Re: What is the mpc 5777c microcontroller flash programming tool

192064963 — Mon, 08 Sep 2025 09:02:44 GMT

Solved. Thank you very much.