topic Re: siul2_port configuration and functional Group setting in s32ds 3.6 in S32 Design Studio

siul2_port configuration and functional Group setting in s32ds 3.6

rlaxortn — Tue, 15 Apr 2025 02:31:39 GMT

i wanna make each port container(adc, pwm, can, uart and so on)

but i got a error about functional Group.

error is there are some duplicated 'NAME' in the PortContainer.

when i write a other PortContainer, portpin Mode, level value, slew Rate is not read. and i get errors.

1. is it imppssible for making multi portcontainer?

2. if it is possible, how it make that?

3. can i get codument or description for setting functional group and adding functional group?

thanks for regards.

Re: siul2_port configuration and functional Group setting in s32ds 3.6

Robin_Shen — Tue, 15 Apr 2025 07:25:01 GMT

Did you add another PortContainer in Pins Tool?

I'm not sure if this is what you need. If not please let me know.

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "ACCEPT AS SOLUTION" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: siul2_port configuration and functional Group setting in s32ds 3.6

rlaxortn — Wed, 16 Apr 2025 07:23:51 GMT

@Robin_Shen

i have questions.

1. what is mean portpin id//?

portpin id is 5 in your post.

@Robin_Shen

what is meaning portpin id is 5 in your pic?

does container 0 already has portpin id 1,2,3,4?

exactly i don't know portpin id's meaning.

is that just index?

2. if i have assign all of pin in one container, is it has a problem?

why s32ds has a continer? for managing pins???

thanks for regards

Re: siul2_port configuration and functional Group setting in s32ds 3.6

Robin_Shen — Thu, 17 Apr 2025 03:36:11 GMT

Please refer to the introduction in Interacting with Digital Inputs/Outputs on MR-CANHUBK344
I have added the portpin id 1,2,3,4 in container 0.