S32DS PE(Multilink) error info: p&e semihosting console

Juns — Tue, 24 Dec 2024 08:53:21 GMT

hi, everyone

When I used PE to debug burning, I encountered an error message from p&e semihosting console.

Please refer to the picture below and solve my problem. I need your help very much! Thank you

Connection from "127.0.0.1" via 127.0.0.1. Connection from port "61351" to 6224 Connection from "127.0.0.1" via 127.0.0.1. Connection from port "61428" to 7224 Telnet server running on 127.0.0.1:51794 Searching for Kernel Symbols... rsp_qC - qSymbol: 5F74785F7468726561645F63757272656E745F707472 _tx_thread_current_ptr not found. ThreadX analysis not enabled. rsp_qC - qSymbol: 707843757272656E74544342 pxCurrentTCB not found. FreeRTOS analysis not enabled. Unable to load libusb0.dll Copyright 2024 P&E Microcomputer Systems,Inc. Command Line :C:\NXP\S32DS.3.5\eclipse\plugins\com.pemicro.debug.gdbjtag.pne_5.9.2.202409131555\win32\pegdbserver_console -device=NXP_S32K1xx_S32K118F256M4 -startserver -singlesession -serverport=7224 -gdbmiport=6224 -interface=USBMULTILINK -speed=5000 -� PEmicro Interface detected - Flash Version 11.37 CMD>RE Initializing. Target has been RESET and is active. CMD>CM C:\NXP\S32DS.3.5\eclipse\plugins\com.pemicro.debug.gdbjtag.pne_5.9.2.202409131555\supportFiles_ARM\NXP\S32K1xx\freescale_s32k118f256m4_pflash_dflash_eeprom.arp Initializing. Initialized. ;version 1.02, 04/06/2020, Copyright 2020 P&E Microcomputer Systems, Inc. All rights reserved. www.pemicro.com [s32k118f256m4_x_pflash_dflash_eeprom_m0] ;device freescale, s32k118f256m4, pflash_dflash_eeprom ;begin_cs device=$00000000, length=$14000800, ram=$1FFFFC00 Loading programming algorithm ... Done. Programming sequency is : erase, blank check, program, and verify {default} CMD>VC Verifying object file CRC-16 to device ranges ... block 00000000-000000BF ... Calculated CRC-16 does not match block. (File = $92D3, Device = $EDBA) Current content of flash does not match application to be programmed CMD>EM Erasing. Module has been erased. Reloading programming algorithm ... done. CMD>PM Programming. Checking range of data. Checked. Processing Object File Data ... . Programmed. CMD>VC Verifying object file CRC-16 to device ranges ... block 00000000-000000BF ... Ok. block 00000400-000084E7 ... Ok. block 00038000-00038003 ... Ok. block 00038010-00038013 ... Ok. block 00038020-00038021 ... Ok. block 00039000-0003900F ... Ok. block 00039800-00039803 ... Ok. block 0003A000-0003A01F ... Ok. block 0003A800-0003A807 ... Ok. block 0003B000-0003B01F ... Ok. block 0003B800-0003B803 ... Ok. block 0003C000-0003C00F ... Ok. block 0003C800-0003C80D ... Ok. block 0003D000-0003D001 ... Ok. block 0003D800-0003D801 ... Ok. block 0003E000-0003E003 ... Ok. block 0003E800-0003E803 ... Ok. block 0003F000-0003F001 ... Ok. Checksum Verification Successful. (Cumulative CRC-16=$8855) CMD>RE Initializing. Target has been RESET and is active. Starting reset script (C:\NXP\S32DS.3.5\eclipse\plugins\com.pemicro.debug.gdbjtag.pne_5.9.2.202409131555\supportFiles_ARM\NXP\S32K1xx\S32K118F256M4.mac) ... Filling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . done Reset script (C:\NXP\S32DS.3.5\eclipse\plugins\com.pemicro.debug.gdbjtag.pne_5.9.2.202409131555\supportFiles_ARM\NXP\S32K1xx\S32K118F256M4.mac) completed. Disconnected from "127.0.0.1" via 127.0.0.1. Disconnection by port "61351" from 6224 Disconnected from "127.0.0.1" via 127.0.0.1. Disconnection by port "61428" from 7224 Target Disconnected.

Re: S32DS PE(Multilink) error info: p&e semihosting console

IsaulO — Thu, 26 Dec 2024 22:51:08 GMT

Hi @Juns ,

PEmicro periodically updates the plugins on its website with new device support, new features, and bug fixes.
Please verify if the GNU ARM PEMicro Interface Debugging Support package requires an update.
You can see it in Help >> S32DS Extensions and Updates.

For more information on How to install and update PEmicro GDB Server plugin, please refer to the following link

PEmicro Blog: Install PEmicro’s GDB Server plugin in NXP’s S32 Design Studio for ARM to enable debugging with Multilink, Cyclone, and OpenSDA hardware interfaces.

Hope it helps you.

BR,

IsaulO.

topic Re: S32DS PE(Multilink) error info: p&e semihosting console in S32 Design Studio

S32DS PE(Multilink) error info: p&e semihosting console

Re: S32DS PE(Multilink) error info: p&e semihosting console