S32 Design StudioのトピックS32 Debug Probe not able to load .elf

S32 Debug Probe not able to load .elf

Kadadi — Tue, 06 Aug 2024 13:57:07 GMT

Hi ,

I am able to compile the FlexCan application from S32Design Studio but when I try to load using S32 Debug Probe facing issue.
Please find the below screenshot of the error which I am facing.

Please let me know if any configuration is missing from myside.

Thanks,

Krishna K

Re: S32 Debug Probe not able to load .elf

Kadadi — Tue, 06 Aug 2024 14:00:51 GMT

Board : S32Z277
Core : M33 Core 0

Re: S32 Debug Probe not able to load .elf

Daniel-Aguirre — Tue, 06 Aug 2024 21:23:58 GMT

Hi,

S32Z/E is still in preproduction, for which for all information/support help us contacting your local NXP FAE/DFAE/representative.

We do apologize for the inconvenience.

Please, let us know.

Re: S32 Debug Probe not able to load .elf

stanish — Mon, 12 Aug 2024 16:07:06 GMT

Hello,

1) let me ask you which version of S32 Design studio are you using?

I'd strongly recommend you install the latest update #13

Please go to installed software and check S32Z2/E2 Development package version

or alternatively you can check it in S32DS Extension and updates:

2) Which board are you targeting? Is it NXP one e.g. S32Z27x - DC (Daughter Card) ?

3) Which S32 Debug probe interface are you using (USB or Ethernet)? Is TX/RX led blinking green when you connect the probe to the board?

4) Have you been able to connect to any other device using S32DebugProbe?

5) Can I ask you where you get the example code you are trying to build and debug?

This will help to address the loading issue much faster.

Thanks,

Stan