topic Unable to find SCB in EmbSys Registers in S32 Design Studio

Unable to find SCB in EmbSys Registers

Janeting123 — Mon, 13 May 2024 08:50:57 GMT

I encountered the same problem as this post.

https://community.nxp.com/t5/S32-Design-Studio/these-is-no-SCB-registers-in-peripheral-registers-view-in-s32ds/m-p/1801178

The S32DS version I am using is 3.4. The installed extensions are as follows

Re: Unable to find SCB in EmbSys Registers

VaneB — Mon, 13 May 2024 20:18:09 GMT

Hi @Janeting123

I tested it with S32DS v3.4 and S32K3XX RTD v2.0.1 and there is no issue. Please instead of using the EmbSys Registers view use the Peripherals Registers view.

Additionally, the S32K3XX RTD v4.0.0 P20 was developed and tested with S32DS v3.5, so, its functionality is not guaranteed in older IDE versions.

B.R.

VaneB

Re: Unable to find SCB in EmbSys Registers

Janeting123 — Tue, 14 May 2024 02:02:32 GMT

This is my peripheral register and it is empty

Re: Unable to find SCB in EmbSys Registers

VaneB — Tue, 14 May 2024 17:55:32 GMT

Hi @Janeting123

To view the information in the Peripheral Registry view is necessary to start a debug session. Could you check if you can see the information when debugging any example code?