topic Re: S32DesignStudio command line tool or configuration tool usage documentation in S32 Design Studio

S32DesignStudio command line tool or configuration tool usage documentation

Jackey_cj — Fri, 01 Mar 2024 06:06:42 GMT

hello,

I want to add a step in the build process to switch configuration sets in the process of automating unit tests. I wondered if I could do this by calling the S32K configuration tool or the command line tool, but when I looked for the relevant documentation, I couldn't find anything that contained the relevant content.

Re: S32DesignStudio command line tool or configuration tool usage documentation

jiri_kral — Mon, 04 Mar 2024 11:59:57 GMT

Hi,

what's your S32DS version and target device?

Re: S32DesignStudio command line tool or configuration tool usage documentation

Jackey_cj — Tue, 05 Mar 2024 03:08:33 GMT

S32DS ARM 2.2 & S32DS POWER 2.1

MPC5745B & S32K146

Re: S32DesignStudio command line tool or configuration tool usage documentation

Jackey_cj — Wed, 06 Mar 2024 00:46:52 GMT

hi,

Is there any data on that?

Re: S32DesignStudio command line tool or configuration tool usage documentation

jiri_kral — Mon, 11 Mar 2024 10:18:24 GMT

Hi,

I'm not sure what you mean by configuration - If you like build for example only Debug_FLASH target, you can add /Debug_FLASH (or the configuration name in your project) after project name. Like this.

c:\NXP\S32DS_ARM_v2.2\eclipse\s32ds.exe -nosplash -application org.eclipse.cdt.managedbuilder.core.headlessbuild --launcher.ini c:\S32DS_ARM_v2.2\eclipse\s32ds.ini -data c:\users\user\workspaceS32DS.ARM.2.2 -cleanBuild hello_world_s32k144/Debug_FLASH