topic Re: S32DS download code fail with MPC574XP in S32 Design Studio

S32DS download code fail with MPC574XP

jefferson_ll — Mon, 14 Nov 2016 10:00:09 GMT

Hi NXP,

I have a problem with S32DS.

The following steps could let me enter debug mode and using single step to trace my code well.
Run -> Debug config -> Debug

When I use "Run -> Run as" there are two options Local c/c++ application and S32DS c/c++ pplication.
I select one of them the another window shows C local application and then I select OK.

As show following figure:

The new window shows "Launch MPC5744-Uart_with_DMA-S32DS.elf" has encountered a problem.

As show following figure:

I don't know how to solve this problem. Does somebody give me a help?

Thank you very much.

Re: S32DS download code fail with MPC574XP

martin_kovar — Mon, 14 Nov 2016 11:19:57 GMT

Hi Jeff,

functionality of this button is not implemented correct. Please use only Debug button to run your application.

Regards,

Martin

Re: S32DS download code fail with MPC574XP

jefferson_ll — Mon, 14 Nov 2016 14:09:19 GMT

Hi Martin Kovar,

Thanks for your reply.

Could you give me some steps about "Debug button" ?

Are there any other settings missing?

Best regards,

Jeff

Re: S32DS download code fail with MPC574XP

jefferson_ll — Tue, 15 Nov 2016 03:00:08 GMT

Hi Martin Kovar,

According your instruction uses Debug button, I can run code in debug mode and Free run mode.

Thanks for your help.

Best regards,

Jeff