S32 Design StudioのトピックRe: hardfault handler error while debugging

hardfault handler error while debugging

Anjalipurushothaman — Thu, 13 Jul 2023 08:56:02 GMT

Re: hardfault handler error while debugging

VaneB — Thu, 20 Jul 2023 16:21:09 GMT

Did you make any modifications to the example code?

I am not able to replicate your issue. Also, the S32K3X8EVB-Q289 is still not available for the mass market. I tested the example in the S32K3X4EVB.

B.R.

VaneB

Re: hardfault handler error while debugging

Anjalipurushothaman — Tue, 08 Aug 2023 16:19:44 GMT

I haven't made any changes to the code other than the syntax errors which popped up (missing semicolon,..).

Please find the below project example used and steps followed.

Development board- s32k3x8evb-Q289

IDE - s32DS for s32 platform

Debugger Used - PE Micro Debugger

Example project from s32k3xx (Port Example - Siul2_Port_Ip_S32K358) (mentioned in the description that supported board as x32k3x8cvb-q289)

*File -New -project from example - port example-finish

*From the Project explorer window, selected the project name - Right click- configuration tool-Under Drivers added Mcu, Port, Dio.

*Click on Update code

*Build Project

*Under Debug configuration-Selected the devices - Debug.

To build and run the example application, generated configurations needed at the Configuration Tool menu then clicked on the desired configuration tool (Pins, Cocks, or Peripherals). Made the desired changes then clicked on the Update Code button. and then select the configuration to be built and finally debug the project.

These are the steps followed, Please go through and let me know if anything wrong in these.

Re: hardfault handler error while debugging

VaneB — Thu, 10 Aug 2023 19:59:57 GMT

Hi @Anjalipurushothaman

Could you share your project? Also, are you using the S32K3 Real-Time Drivers Version 3.0.0, released on March 31, 2023?

Re: hardfault handler error while debugging

Anjalipurushothaman — Fri, 11 Aug 2023 09:39:02 GMT

Please find the attached program used from the S32K3rtd example projects.

(S32K358 Real-Time Drivers Version 3.0.0 CD03 ) is the RTD used.

Re: hardfault handler error while debugging

VaneB — Fri, 11 Aug 2023 17:56:37 GMT

Hi @Anjalipurushothaman

Could you help me to test the example with a more recent release of the S32K3 Real-Time Drivers Version 3.0.0 (released on March 31, 2023, or onwards)?

Re: hardfault handler error while debugging

Anjalipurushothaman — Sun, 13 Aug 2023 19:41:24 GMT

Sure, I have donwloded the (SW32K3_RTD_4.4_3.0.0_P01_HF01_D2304.exe file).

how to replace this RTD version with the previosuly donwloded version?

After the download, do I need to follow any steps to update it on the s32Dstudio IDE?

Re: hardfault handler error while debugging

VaneB — Mon, 14 Aug 2023 18:15:50 GMT

Hi @Anjalipurushothaman

To uninstall any packages on S32DS, go to the Help tab -> Installation Details. Once you select the RTD version, at the bottom of the Installation Details window, there is an Uninstall.. option.

To install the new RTD version, first download the updatesite.zip file and follow the instructions of S32DS Extensions & Updates: Explanation and How To Use.

Re: hardfault handler error while debugging

Anjalipurushothaman — Tue, 15 Aug 2023 21:38:07 GMT

Please find the installation made offline (S32K3 Realtime Drivers version 3.0.0 P01)Image attached.

while hitting the build project option from the project explorer getting error message as attached. Tried with other versions as well stating that partivular sdk is not supported.

Re: hardfault handler error while debugging

VaneB — Wed, 16 Aug 2023 17:55:53 GMT

Hi @Anjalipurushothaman

Did you install the Development Package with support for S32K3xx devices for S32DS v.3.5? If not you can download it from S32K3 Standard Software -> Automotive SW - S32K3 - S32 Design Studio -> S32 Design Studio 3.5.0 Development Package with support for S32K3xx devices (released on March 31, 2023).

Re: hardfault handler error while debugging

Anjalipurushothaman — Thu, 17 Aug 2023 16:22:43 GMT

Yes, I been using the same sdk specific to s32k3xx devices (Please find the attached RTD and sdk installed from s32DS Extensions and updates).Now while hitting the debug option , it's not entering into any hardfault (please find the attached Debugger console).

As the specific sample program refers to the toggling of LED, inorder to see the toggling while hitting run configuration, the options to choose are c/c++application/eclipse/GDB Segger. so what are the steps involved inorder to flash this code into the evaluation board to see the toggling.(I have attached the run configuration tab, pin configurations made for the code).

what are the modifications needed on this ?

Re: hardfault handler error while debugging

VaneB — Thu, 17 Aug 2023 19:20:14 GMT

Hi @Anjalipurushothaman

Firstly, the board you are using is still not a mass-market product. So, the example probably is not correctly routed. Please verify with the schematic of your board that the configured pin is the one connected to the LED.

Also, you mentioned that you used the Run option, please try using the Debug option and the configuration to be built is FLASH (Debug_FLASH).

Re: hardfault handler error while debugging

Anjalipurushothaman — Tue, 22 Aug 2023 13:11:28 GMT

As per the schematic, the changes have been made in the configuration tab. Specific to the LED D33, the pin allocation and the changes made on the code are attached. Stil the led not blinking.

As i have stated earlier , run configuration tab and the avilable options showing is only these, out of that which option has to be selected to flash the code on to the board? (Please find the attached jpg file named "Run configuration options").

Also if i have slected debug configuration option (FLASH (Debug_FLASH).) how can I analyse the code is running ? how can i able to know the LED blink as the debug configuration make the code to pause at each instance?

Re: hardfault handler error while debugging

VaneB — Tue, 22 Aug 2023 21:37:10 GMT

Hi @Anjalipurushothaman

You are still selecting the Run Configurations instated of Debug Configurations. Please use the option shown in the attached images.

Also, the example code configures the pin using a label to identify it. I suggest configuring the corresponding LED pin as it was by default. If you put a label in the pin configuration, Config Tools generate two defines in Siul2_Port_Ip_Cfg.h file, these are the ones that you can use in Siul2_Dio_Ip_ReadPin().

Re: hardfault handler error while debugging

Anjalipurushothaman — Wed, 23 Aug 2023 09:41:33 GMT

I have tried using the debug configuration option, but my query is if I have slected debug configuration option (FLASH (Debug_FLASH).) how can I analyse the code is running ? how can i able to know the LED blink ? Because the debug configuration make the code to pause at each instance right?

Re: hardfault handler error while debugging

VaneB — Wed, 23 Aug 2023 22:25:42 GMT

Hi @Anjalipurushothaman

To learn how works Debug in S32DS, please refer to the section named Debugging a project of the S32 Design Studio for S32 Platform 3.5 User Guide that you can find at C:\nxp\S32DS.3.5\S32DS\help\pdf\S32DS_User_Guide.pdf

Re: hardfault handler error while debugging

Anjalipurushothaman — Fri, 25 Aug 2023 09:34:48 GMT

As per the earlier conversation, making the default pin configurations (PTG30 , F5 , GPIO 222) Please find the attached eerors after the build.

Re: hardfault handler error while debugging

amitra — Mon, 28 Aug 2023 16:42:19 GMT

Hi @VaneB ,

There is a hard fault handler error while running the same example code.
Having same issues with same configuration.
Please advise.

Re: hardfault handler error while debugging

VaneB — Mon, 28 Aug 2023 21:31:36 GMT

Hi @Anjalipurushothaman

When you create the project from an example, did you click Update Code at Config Tools?

Also, if you put a label in the pin configuration, generate two definitions that can be used in the functions.

Re: hardfault handler error while debugging

Anjalipurushothaman — Tue, 29 Aug 2023 18:49:31 GMT

Still the hard fault error is showing, while resuming the debug session the code enters into hard fault .

How to fix this issue?