S32 Design StudioのトピックRe: What packages needed for a T-Box Autosar project using S32 DS3.5 ?

What packages needed for a T-Box generic bringup " HelloWorld" using S32 DS3.5 ?

Ahmed_Saber — Mon, 21 Aug 2023 12:52:05 GMT

Hello,

I need to install the packages dedicated to the T-Box development, it is the first bring-up for the "Helloworld"
Not sure which packages I have to install and how ( I mean which SDKs, which BSPs)
Appreciate any help

Thanks

Re: What packages needed for a T-Box Autosar project using S32 DS3.5 ?

Ahmed_Saber — Sat, 19 Aug 2023 13:47:26 GMT

For example in the Getting started document for the T-Box
it refers to this package

Ahmed_Saber_0-1692452780948.png

But I'm not sure where can I get this package.

Re: What packages needed for a T-Box Autosar project using S32 DS3.5 ?

lukaszadrapa — Tue, 22 Aug 2023 06:18:27 GMT

Hi @Ahmed_Saber

let me check this with owners of the T-Box. I can see two getting started documents and SW enablement guide and all of them says something different. I'm sure that specific RTD version needs to be used.

Generally, the RTD can be downloaded from S32K3 Standard Software Package. The link can be found here in the mentioned document:

lukaszadrapa_2-1692684974517.png

this will redirect you here (RTD link highlighted)

lukaszadrapa_3-1692685019705.png

I will let you know later which version should be used exactly.

And notice that this document provides more details about the installation:

https://www.nxp.com/webapp/Download?colCode=TP-S32K3-T-BOX-SW-ENABLEMENT-GUIDE

Regards,

Lukas

Re: What packages needed for a T-Box Autosar project using S32 DS3.5 ?

lukaszadrapa — Tue, 22 Aug 2023 09:58:08 GMT

Please follow this guide:

https://www.nxp.com/webapp/Download?colCode=TP-S32K3-T-BOX-SW-ENABLEMENT-GUIDE

There's detailed description. S32DS 3.4 and RTD 1.0.0 is needed.

“Getting Started with S32K3 using S32DS at the hello world project Training Presentation” document is general one, not directly for T-Box.

Regards,

Lukas

Re: What packages needed for a T-Box Autosar project using S32 DS3.5 ?

Ahmed_Saber — Fri, 25 Aug 2023 14:41:55 GMT

Hello Lukas,

Thanks for the response.
but I would like to download the BSP, as I'm targetting to bring up the T box for CAN communication
Which one shall I use

Re: What packages needed for a T-Box Autosar project using S32 DS3.5 ?

lukaszadrapa — Mon, 28 Aug 2023 04:28:14 GMT

Hi @Ahmed_Saber

just follow the document step by step. It shows which packages are needed exactly:

lukaszadrapa_0-1693196817138.png

By the way, it's not called BSP here but rather RTD (Read Time Drivers).

Regards,

Lukas

Re: What packages needed for a T-Box Autosar project using S32 DS3.5 ?

Ahmed_Saber — Tue, 29 Aug 2023 08:47:07 GMT

Hi Lukas,

Again, I don't mind the instructions mentioned in the enablement guide, but as you said earlier it is something common for the S32K3, but what I'm seeking is something for the T box board
I have installed the DS3.4 with the mentioned packages
Now I need to proceed with a prepared package for the T box to not invent the wheel
As I can see here: https://www.nxp.com/design/designs/s32k3-automotive-telematics-box-t-box-reference-design-board:S32K3-T-BOX
There a BSP package, in my opinion, this is can be used as a base for SW building for the T box ready for the components on the board ( Trcvs...etc)

But the problem is, once I import this BSP as a project, I got this error message

2023-08-29 10_43_56-Snipping Tool.png

Hope you get my point.

Regards Ahmed

Re: What packages needed for a T-Box Autosar project using S32 DS3.5 ?

Ahmed_Saber — Tue, 29 Aug 2023 08:50:01 GMT

Also,
this is the installed packages

Ahmed_Saber_0-1693298946029.png

And this the DS32 tool version I have installed

Ahmed_Saber_1-1693298993443.png

Re: What packages needed for a T-Box Autosar project using S32 DS3.5 ?

lukaszadrapa — Wed, 30 Aug 2023 07:11:20 GMT

I tested it on my side. I have almost the same SW configuration here (only a few more packages which should not be important here), I downloaded and imported S32K3_T_BOX_BSP.zip and I can open the configuration tool and I can compile the project.

Is that really original project from S32K3_T_BOX_BSP.zip? Have you made any changes there?

https://www.nxp.com/webapp/Download?colCode=S32K3-T-BOX-BSP

My SW:

lukaszadrapa_0-1693379242351.png

Regards,

Lukas