S32 Design StudioのトピックRe: Post build action not invoked

Post build action not invoked

g_mass — Mon, 31 Jul 2023 10:28:28 GMT

Hello,

i'm trying to run a bat file as a post-build action in S32DS but it seems it is not invoked. I've tried to uncheck parallel build, but nothing happens.

Re: Post build action not invoked

Daniel-Aguirre — Tue, 01 Aug 2023 19:52:39 GMT

Hi,

How are you creating the post-build step? Also, which S32DS version are you using?

Please, let us know.

Re: Post build action not invoked

g_mass — Wed, 02 Aug 2023 06:48:42 GMT

Post build creation: Project Properies -> C/C++ Build -> Settings -> Post-build steps

In command, i put "${ProjDirPath}<path to bat file>" "${ProjDirPath}"

S32DS version: 3.5.0.2

Re: Post build action not invoked

Mehul_Patel_NXP — Wed, 02 Aug 2023 11:35:00 GMT

Hi, @g_mass ,

Please can you share more information related to your question? Please can you share the screenshots, and what device you are using? Please can you provide details what commands you are trying.

Now, for the understanding POST build steps

---------------------------------------------------------------

1. How to Select your project see the option for adding command at

Please go to as screenshot below

Properties -> Settings -> Build steps -> Post build-steps

and write command at

command :

Now, you also need to understand that, command that you enter POST build steps check box, will be added to the makefile which will be specifying the operations to perform POST building the .elf file

So in the below two screenshots you can see that

1. echo command has been entered into command section, and then

2. the echo command is put in the makefile

You can also first try using echo command and printing the test message to be sure that it is working.

Similarly, You can add the "Valid" command in the POST -build section for your requirement.

Please let us know about the command you are trying to install.

Thank you, Kind regards,

- Mehul Patel

Re: Post build action not invoked

g_mass — Wed, 02 Aug 2023 14:21:46 GMT

This is the screenshot of my setting page. I'm using an SJA1110. I've tried echo command to print a simple screen and i confirm that it is not working either.

Re: Post build action not invoked

Mehul_Patel_NXP — Tue, 08 Aug 2023 21:24:27 GMT

Hi, @g_mass ,

Please can you share the S32DS workspace from

: C:\Users\Public\[workspace_name]\.metadata

OR wherever your workspace is located

Thank you. Best regards.

- Mehul Patel

Re: Post build action not invoked

g_mass — Mon, 21 Aug 2023 12:20:54 GMT

Here attached metadata folder as .zip file (except plugin folder, it exceeds maximum size for upload)