S32 Design StudioのトピックRe: FreeRTOS Toggle LED Example: Siul2_Dio not found

FreeRTOS Toggle LED Example: Siul2_Dio not found

markhodges — Thu, 22 Jun 2023 16:39:14 GMT

Using S32DS v3.5.2 on Linux, I cannot compile the FreeRTOS_Toggle_Led_Example_S32K44 project. The code generation for the Siul2_Dio peripheral fails because it cannot find "../siul2_dio/siul2_dio_codegen.js".

That script does exist:

[hodges@hodges-xps:opt/NXP/S32DS.3.5]
% find . -name "siul2_dio_code*"
./eclipse/mcu_data/components/PlatformSDK_S32K3/Siul2_Dio/siul2_dio_codegenerator.js

Any suggestions on how to resolve this?

Re: FreeRTOS Toggle LED Example: Siul2_Dio not found

jiri_kral — Tue, 27 Jun 2023 11:08:43 GMT

Hi Mark,

unfortunatelly RTD is not officially supported on Linux host (that's why you need to install it from offline source) and is not tested. Anyway - the Siul issue is related to Case Sensitive OS. If you like to use it - you need to modify some files. If your project is more complex - you probably will need to modify similar files for other modules.

Here are instructions for siul and lpi2c:

Re: FreeRTOS Toggle LED Example: Siul2_Dio not found

markhodges — Tue, 27 Jun 2023 15:52:02 GMT

I meant to reply to myself, but forgot -- I was able to move past the problem by fixing the path as you noted above. Thanks for getting back to me!

Re: FreeRTOS Toggle LED Example: Siul2_Dio not found

tobeastar — Sun, 09 Feb 2025 12:12:13 GMT

RTD is not officially supported on Linux because the Case Sensitivity on Linux OS.
To make the RTD working on Linux, need some changes in folder: /NXP/S32DS.3.X/eclipse/mcu_data/components

Please read the 'ReadmeToModifyTheRTD.txt', I only did the neccesarry changes for my project, for other codes may need more changes.

Just my opinion: Linux OS has much faster performances when S32DS doing the code's compiling and debugging. NXP should officially support it, including the RTD ~