topic Re: error getting while running an application project in S32 Design Studio

error getting while running an application project

Anjalipurushothaman — Thu, 01 Jun 2023 10:16:05 GMT

This is the error iam getting while running a simple code in s32 design studio.

IDE - S32DS 3.5

Evaluation board Board - s32k3x8evb-q289

Re: error getting while running an application project

VaneB — Fri, 02 Jun 2023 17:33:54 GMT

We do not recommend using printf and scanf. It is suggested to use the UART to print information with the MCU into a console.

Even so, if it is possible to use them, for that you need to use lib C with the Debugger console:

And the printf output is going to be shown in the Semihosting console.

B.R.

VaneB

Re: error getting while running an application project

Anjalipurushothaman — Fri, 02 Jun 2023 11:23:26 GMT

Traget processor option is not enabled here ,

Re: error getting while running an application project

VaneB — Fri, 02 Jun 2023 17:54:07 GMT

Hi @Anjalipurushothaman

If you run an example project you get the same problem?

Re: error getting while running an application project

jiri_kral — Sat, 03 Jun 2023 10:45:56 GMT

Hi,

you are trying run the target .elf file on your PC Machine - which is impossible. You probably create your project as a C/C++ Project instead of S32 Application Project:

For running it - you need to start debug session:

Re: error getting while running an application project

Anjalipurushothaman — Mon, 05 Jun 2023 09:49:15 GMT

Okay will proceed with selecting c/c++ project.

Please do clarify on the path for GCC COMAND tab

Re: error getting while running an application project

jiri_kral — Mon, 05 Jun 2023 10:52:48 GMT

Hi,

using the C/C++ project is the wrong way - that's why you get the error. Correct way is use New -> S32DS Application project:

As a next step choose your MCU:

This procedure configure all project settings for you.

Re: error getting while running an application project

Anjalipurushothaman — Mon, 05 Jun 2023 14:01:26 GMT

I tried executing application project earlier, i can build a project but whiling running error iam getting is as attached. the board is getting detected but, in the run cnfiguration, twhile selecting open sda, com port is not showing. without selecting com port run is unsuccesful.

Re: error getting while running an application project

Anjalipurushothaman — Mon, 05 Jun 2023 15:55:43 GMT

yes, i do get the same error without selecting com port not abl to run

Re: error getting while running an application project

Anjalipurushothaman — Mon, 05 Jun 2023 16:43:54 GMT

please find attached target processor not detecting

Re: error getting while running an application project

jiri_kral — Mon, 05 Jun 2023 18:33:29 GMT

Sorry, to be honest I really don't understand your situation. For testing target MCU code you need cross compiler (in this case gcc for ARM) and debug probe, which is able upload output binary into target device. On S32K344 it is integrated PE Micro FX Embedded. I have no experience with S32K358 board.

Can you please describe in more details your HW/SW setup? Which debug probe is present on your EVB? Looks that your Debug probe is recognized by OS, did you select the correct version in S32DS debug configurations?

Re: error getting while running an application project

Anjalipurushothaman — Tue, 06 Jun 2023 10:15:29 GMT

the evb is s32k3x8EVB-Q289

Open SDA Debugger

12v external power

software IDE- s32DS 3.5 (which supports s32k3xx series)