topic Re: s32ds 3.5 in S32 Design Studio

s32ds 3.5

Anjalipurushothaman — Tue, 30 May 2023 12:08:36 GMT

Please find attached While debugging, port is not showing up in the window. Checked the com port the board is getting detected , but in the debug configuration tab it is not showing

Re: s32ds 3.5

Mehul_Patel_NXP — Wed, 31 May 2023 11:27:11 GMT

Hi, @Anjalipurushothaman ,

As I see Debug option is available, please can you give a shot and hit Debug button whether it is working or not, and if follows up with any error message please can you reply with the particular error message.

Thank you. Best regards.

Re: s32ds 3.5

Anjalipurushothaman — Wed, 31 May 2023 12:21:49 GMT

please find the error iam getting

Re: s32ds 3.5

Anjalipurushothaman — Wed, 31 May 2023 12:45:14 GMT

Re: s32ds 3.5

Mehul_Patel_NXP — Thu, 01 Jun 2023 19:51:17 GMT

Hi, @Anjalipurushothaman ,

Please can you check that required driver is installed properly?

You can download relevant driver as per your system configurations from: https://ftdichip.com/drivers/

Please can you try it and revert whether it is working or not.

Thank you. Best regards.

- Mehul

Re: s32ds 3.5

Anjalipurushothaman — Fri, 02 Jun 2023 12:07:36 GMT

Thanks for your reply,Still the same error.

Please provide the link of required drivers for S32K3X8EVB-Q289 evaluation board on s32DS 3.5.