topic Re: MPC5748G boot header F8C000h cannot erase in S32 Design Studio

MPC5748G boot header F8C000h cannot erase

junehsiao — Tue, 30 May 2023 05:19:39 GMT

I previously flash a code which chose F8C000h as boot header.

However, I wanted to change the boot header to FA0000h, so I flash another code with boot header in FA0000h.

I expect F8C000h address will first be cleared automatically when I use multilink JTAG to burn code, but the result is I got 005A in the first half word in both F8C000h and FA0000h.

How to earse the boot header in F8C000h?

thanks

Re: MPC5748G boot header F8C000h cannot erase

jiri_kral — Tue, 30 May 2023 10:46:15 GMT

Hi,

unfortunately PEMicro plugin for S32DS is not able perform erase only. You can use PE Micro PPCNEXUS software which can be download on PE Micro pages.

For erasing the 0xF8C000 memory space you need to select nxp_mpc5748g_1x32x32k_hsmcode.pcp programing algorithm.

Other possibility is using this workaround -

https://community.nxp.com/t5/S32-Design-Studio-Knowledge-Base/HOWTO-MPC5777C-Low-Mid-Flash-block-erase-via-PE-Micro/ta-p/1123596

add use the same algorithm:

Re: MPC5748G boot header F8C000h cannot erase

junehsiao — Tue, 30 May 2023 11:52:28 GMT

Hi,

For the PE Micro PPCNEXUS software, I got this error

and cannot connect MPC5748G to PE Micro PPCNEXUS.

As for the HOWTO link, do you have this mpc5777c_low_mid_empty.srec file for MPC5748G?

That post only have empty s-record file in MPC5777C.

Thanks

Re: MPC5748G boot header F8C000h cannot erase

jiri_kral — Tue, 30 May 2023 12:30:13 GMT

Hi,

in the HOWTO document is srec generator written in python. You can generate your own s-record.

Re: MPC5748G boot header F8C000h cannot erase

junehsiao — Tue, 30 May 2023 12:53:47 GMT

Hi,

Is there a sample code of how to generate a s-record that can erase all memories?

I would like it simply to erase all memory in my MPC5748G board.

Thanks

Re: MPC5748G boot header F8C000h cannot erase

jiri_kral — Tue, 30 May 2023 12:53:56 GMT

The powercycle of board works, but you need to have external power supply if you are using integrated OpenSDA debugger. Powercycle the board together with clicking on OK button. You need to be quick.

Re: MPC5748G boot header F8C000h cannot erase

junehsiao — Tue, 30 May 2023 12:58:28 GMT

Hi,

I'm a little confused by the steps.

I am using multilink jtag.

Do you mean turn on the power of my MPC5748G-LCEVB board and click "connect" button in progppcnexus.exe quickly?

Re: MPC5748G boot header F8C000h cannot erase

jiri_kral — Tue, 30 May 2023 13:12:56 GMT

No, click on OK button on Reset Escalation message. I just test it on my side (I was able bring my board to the state as your is) - after board reset is reset Red diode lighting and I have some A5 value and some garbage on 0xF8C0000. With PPCNEXUS SW I was able recover it.

I simply simultaneously switched power and click on OK button. After that I erased flash memory.

Re: MPC5748G boot header F8C000h cannot erase

junehsiao — Tue, 30 May 2023 13:30:56 GMT

Hi,

After I encounter this error message:

I turn off the power of the board.

And then simultaneously turn on the power and press "OK" button.

Then I got this:

It seems like hasn't been connected yet.

Do you know why?

Re: MPC5748G boot header F8C000h cannot erase

jiri_kral — Tue, 30 May 2023 13:34:42 GMT

First step is connect to board - after connect - the Reset Message appears.

Re: MPC5748G boot header F8C000h cannot erase

junehsiao — Tue, 30 May 2023 13:42:00 GMT

Hi,

Yes, I did connect to the board first.

These are my steps:

1. Press connect

2. Got this message

3. Power off the board. Then simultaneously power on the board and click OK.

4. This window shows:

I choose NXP_MPC5748G_1x32x32k_HSMCode.pcp

5. This message pops up again:

6. Power off the board. Then simultaneously power on the board and click OK, again.

7. Result:

Re: MPC5748G boot header F8C000h cannot erase

jiri_kral — Tue, 30 May 2023 15:51:40 GMT

Well, keep trying - it is little bit tricky. On my side after power on - there is little delay before the Red LED starts lighting. You need to fit pressing the OK button exactly in this time - after power on and before Red LED starts light.

Re: MPC5748G boot header F8C000h cannot erase

junehsiao — Wed, 31 May 2023 13:17:17 GMT

Hi,

For my board, after power on, the red light immediately light up (without any delay).

So it is impossible to click OK after power up and before red light on.

Do you know why for your board there is a small delay, but for mine there isn't?

My board is MPC5748G-LCEVB.

Is it because different type of EVB board?

Re: MPC5748G boot header F8C000h cannot erase

jiri_kral — Wed, 31 May 2023 13:31:49 GMT

Hi,

this is not related to EVB. But you have only 300ms. Here is thread related to Reset Escalation https://community.nxp.com/t5/MPC5xxx/MPC5748G-Reset-escalation-PEMicro-Multilink-FX/m-p/951221