RAppID BL Tools for S32K144

zhaoyanling — Mon, 13 May 2019 07:10:12 GMT

Dear expert：

My development is based on S32K144 EVB –Q100. Now I meet a question on RAppID Boot Loader Utility. The version of RAppID BL tools is shown as following:

My steps are following:

1. insert openSDA USB prot, and there is a mass storage is shown on my computer:

2.I copy SK144_Bootloader.rbf into F disc:

3.the pins are configured as following:

Jumper	Configuration	Description
J104	1-2	Reset signal to OpenSDA,used to enter into OpenSDA Bootloader mode
J107	1-2	S32K144 powered by 12V power source.

4.only push the “reset” button on EVB, not power off.

5.open the “RAppID Boot Loader Utility”,and setings are shown as following:

6.but the error is shown as following:

7.I have tried some different rbf file, but the error is always the same. These rbf files are attached.

Could you help me? my questions are:

1. Is the step 4 right? Should I power off the EVB after copy rbf file into mass storage device?

2.Need I copy *.rbm or rba file into the mass storage device?

3. how can I get the correct rbf file?

Thank you very much for your kind help!

Re: RAppID BL Tools for S32K144

jiri_kral — Mon, 20 May 2019 12:44:42 GMT

Hi,

there is timeout for boot loader. Just reset your board and try connection again. The rbf file can be also flashed in s32ds - it is nornmal s-record file. But copy it in mass storage should work okay.

Jiri

Re: RAppID BL Tools for S32K144

markus_29 — Tue, 02 May 2023 05:56:23 GMT

Hi,

how to flash the rbl file with the S32DS to a S32K148?

Markus

S32 Design StudioのトピックRe: RAppID BL Tools for S32K144

RAppID BL Tools for S32K144

Re: RAppID BL Tools for S32K144

Re: RAppID BL Tools for S32K144