LS1046 RDB : "Qman ErrInt: Invalid Enqueue State" error being displayed during packet reception

veereshsajjan — Mon, 04 Sep 2017 12:00:39 GMT

Hi ,

I'm working on DNI custom LS1046A RDB boards.

And I have changed the custom dts changes to the latest ASK7.0.1.B1, build and flashed kernel image.

when I configure ip address on interface and try to ping from remote end, below error is being observed.

Qman ErrInt: DCP id 0
Qman ErrInt: ecir.fqid 0x10255
Qman ErrInt: Invalid Enqueue State
Qman ErrInt: DCP id 0
Qman ErrInt: ecir.fqid 0x10255
Qman ErrInt: Invalid Enqueue State
Qman ErrInt: DCP id 0
Qman ErrInt: ecir.fqid 0x10255
Qman ErrInt: Invalid Enqueue State.

The above observation is for eth0 interface but when I configured the IP on eth1 interface and perform ping, ping is successful without any errors

I have attached the dts file for your reference, Please provide some inputs to resolve this issue quickly.

Thank you

Original Attachment has been moved to: fsl-ls1046a-rdb.dts.zip

Re: LS1046 RDB : "Qman ErrInt: Invalid Enqueue State" error being displayed during p

d-z-c — Thu, 01 Apr 2021 12:48:29 GMT

HI @veereshsajjan

Do you have a good answer about this issue now?

If yes,could you share it?

Best wishes.

topic LS1046 RDB : "Qman ErrInt: Invalid Enqueue State" error being displayed during packet reception in QorIQ

LS1046 RDB : "Qman ErrInt: Invalid Enqueue State" error being displayed during packet reception

Re: LS1046 RDB : "Qman ErrInt: Invalid Enqueue State" error being displayed during p