topic Re: Debug U-boot in Qonverge https://community.nxp.com/t5/Qonverge/Debug-U-boot/m-p/447650#M143 <HTML><HEAD></HEAD><BODY><P>Hi Quyen,</P><P></P><P>After attach to u-boot, when uboot.tcl file is not available, you can reset the board from reset button with no initialization file.</P><P></P><P>Adrian</P></BODY></HTML> Fri, 09 Oct 2015 05:43:53 GMT addiyi 2015-10-09T05:43:53Z Debug U-boot https://community.nxp.com/t5/Qonverge/Debug-U-boot/m-p/447649#M142 <HTML><HEAD></HEAD><BODY><P>Hi everybody,</P><P></P><P>Currently, I'm working in B4860QDS development board.</P><P>I try to debug u-boot in this board but I have some problem bellow.</P><P>I read doc(AN4876.pdf) It guides to debug u-boot. I shows we need <SPAN style="font-size: 12pt; color: #000000;">B4860QDS_uboot_32.tcl initialization file for B4860 chipset.</SPAN></P><P>But in "C:\Freescale\CW_PA_v10.5.0\PA\PA_Support\Initialization_Files\Qonverge" directory does not have this file.</P><P></P><P>Can you tell me how i can get this file to debug u-boot on this chipset?</P><P></P><P>Thanks &amp; best regards,</P><P>Quyen.</P></BODY></HTML> Fri, 09 Oct 2015 04:11:43 GMT https://community.nxp.com/t5/Qonverge/Debug-U-boot/m-p/447649#M142 canvanquyen 2015-10-09T04:11:43Z Re: Debug U-boot https://community.nxp.com/t5/Qonverge/Debug-U-boot/m-p/447650#M143 <HTML><HEAD></HEAD><BODY><P>Hi Quyen,</P><P></P><P>After attach to u-boot, when uboot.tcl file is not available, you can reset the board from reset button with no initialization file.</P><P></P><P>Adrian</P></BODY></HTML> Fri, 09 Oct 2015 05:43:53 GMT https://community.nxp.com/t5/Qonverge/Debug-U-boot/m-p/447650#M143 addiyi 2015-10-09T05:43:53Z