topic Re: Unable to Flash my MPC8548CDS: Flash Programmer indicates 0 bytes programmed in PowerQUICC Processors

Unable to Flash my MPC8548CDS: Flash Programmer indicates 0 bytes programmed

jamesbetancourt — Fri, 03 Oct 2014 15:26:50 GMT

Hi,

Im using CodeWarrior for Power Architecture V10.2.1. I used the Bareboard Project wizard to create code for the MPC8548. Im usign USB TAP to flash the board. This is the message the Console display:

fl::target -lc "LC for Simple Flash"

fl::target -b 0x2000 0x20000

fl::target -v off -l off

cmdwin::fl::device -d "AM29LV641D" -o "4Mx16x1" -a 0xff000000 0xff7fffff

cmdwin::fl::image -f "D:\BB_8548Test3-core0\\RAM\\BB_8548Test3-core0.elf" -t "Elf Format" -re on -r 0xff000000 0xff7fffff -oe off

cmdwin::fl::write verify

Flash Programmer internal error: connection list is empty

Beginning Operation ...

-------------------------

Using restricted address range 0xFF000000 to 0xFF7FFFFF

Programming file D:\BB_8548Test3-core0\RAM\BB_8548Test3-core0.elf

0 Bytes Programmed, Check Restricted Address Range

Program Command Succeeded

cmdwin::fl::verify

-------------------------

Using restricted address range 0xFF000000 to 0xFF7FFFFF

Verifying file D:\BB_8548Test3-core0\RAM\BB_8548Test3-core0.elf

0 Bytes Verified, Check Restricted Address Range

Verify Command Succeeded

Re: Unable to Flash my MPC8548CDS: Flash Programmer indicates 0 bytes programmed

addiyi — Mon, 06 Oct 2014 05:59:40 GMT

Please check the option "Restrict to Addressee in this Range" to be un-selected (Go to Program/ Verify Action and check the option).

Adrian

Re: Unable to Flash my MPC8548CDS: Flash Programmer indicates 0 bytes programmed

yipingwang — Wed, 08 Oct 2014 03:15:49 GMT

Hello James,

According to the programmer log, you didn't specify the offset address.

Please open the panel "Add Program/Verify Action" panel, check the option "Apply Address Offset", and specify the exact effective address where the images is located on Nor Flash. For example, if you want to put the image at the beginning of the NOR flash, you need to specify offset address as "0xff000000".

Have a great day,
Yiping

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------