PowerQUICC ProcessorsのトピックRe: UBoot compile and debug use CodeWarrior 8.8

UBoot compile and debug use CodeWarrior 8.8

00lirui — Wed, 29 Oct 2014 06:54:02 GMT

Could i compile and debug uboot of mpc8306som code in CodeWarrior IDE windows version? How to do it?

Thanks.

Re: UBoot compile and debug use CodeWarrior 8.8

catalindemergia — Wed, 29 Oct 2014 08:00:18 GMT

Hi,

what you can do is to build on a Linux machine and after that import your ELF in CW

and attach to the board's u-boot to debug.

regards,

Catalin

Re: UBoot compile and debug use CodeWarrior 8.8

00lirui — Wed, 29 Oct 2014 08:05:58 GMT

Do you mean I can debug code in windows CW and compile on the linux machine?

Re: UBoot compile and debug use CodeWarrior 8.8

catalindemergia — Wed, 29 Oct 2014 09:00:52 GMT

yes, you can debug in CW running on a Windows machine the image that was built in Linux.

Catalin

Re: UBoot compile and debug use CodeWarrior 8.8

Pavel — Wed, 29 Oct 2014 11:15:48 GMT

Look at the Section "Debugging the U-Boot Bootstrap Firmware" of the Pro & Linux App Edition Targeting Manual.pdf file. This file is available in the CodeWarrior folder.

Re: UBoot compile and debug use CodeWarrior 8.8

lunminliang — Thu, 30 Oct 2014 01:36:49 GMT

For how to do, see this doc on community:CodeWarrior U-Boot Debugging