PowerQUICC ProcessorsのトピックRe: T1042 JTAG select

T1042 JTAG select

shinbo — Tue, 05 Jul 2022 07:55:03 GMT

What is the JTAG of T1042?

Re: T1042 JTAG select

nxf45548 — Tue, 05 Jul 2022 19:24:44 GMT

Hi @shinbo
Thank you for contacting NXP technical support.
You can use the JTAG the Codewarrior Tap:
https://www.nxp.com/design/software/development-software/codewarrior-development-tools/run-control-devices/codewarrior-tap:CW_TAP

Regards,
Susi

Re: T1042 JTAG select

shinbo — Wed, 06 Jul 2022 00:11:45 GMT

It is confirmed that CW_TAP is JTAG.
Then, I want to build RCW file on T1042, what file should I build?
ex) .bin, .elf

Re: T1042 JTAG select

Hector_Villarruel — Mon, 29 Aug 2022 16:49:56 GMT

If you are trying to load code from the beginning you probably need the .elf file.

On the other hand whether you are trying to load an specific application or using some codes that the main code use in his place, you will need the .bin file

Best Regards,

Hector Villarruel