https://community.nxp.com/t5/PowerQUICC-Processors/How-to-flash-u-boot-to-NOR-flash-MT28EW128-using-Codewarrior-8-8/m-p/1373432#M3977 <P>I am using MPC8248, and I need to bring up the board using NOR flash, so I need to flash the U-boot to NOR flash using Codewarrior 8.8, If anybody have the document, please share with me.</P><P>&nbsp;</P><P>Regards,</P><P>Winston.</P> Thu, 18 Nov 2021 10:44:59 GMT winstonjacob 2021-11-18T10:44:59Z https://community.nxp.com/t5/PowerQUICC-Processors/How-to-flash-u-boot-to-NOR-flash-MT28EW128-using-Codewarrior-8-8/m-p/1373432#M3977 <P>I am using MPC8248, and I need to bring up the board using NOR flash, so I need to flash the U-boot to NOR flash using Codewarrior 8.8, If anybody have the document, please share with me.</P><P>&nbsp;</P><P>Regards,</P><P>Winston.</P> Thu, 18 Nov 2021 10:44:59 GMT https://community.nxp.com/t5/PowerQUICC-Processors/How-to-flash-u-boot-to-NOR-flash-MT28EW128-using-Codewarrior-8-8/m-p/1373432#M3977 winstonjacob 2021-11-18T10:44:59Z https://community.nxp.com/t5/PowerQUICC-Processors/How-to-flash-u-boot-to-NOR-flash-MT28EW128-using-Codewarrior-8-8/m-p/1374175#M3978 <P>For flash programming in CodeWarrior 8.8, please refer to the attached ppt.</P> <P>MT28EW128 is not provided in flash programing device list in CodeWarrior 8.8.&nbsp;</P> <P>The <FONT class="&amp;quothighlight&quot;"><STRONG>MT28EW</STRONG></FONT> is compatible with the S29GL-P and S29GL-N 128Mb, 256Mb, 512Mb, and 1Gb devices, please try to use&nbsp; S29GL-P and S29GL-N device for programming your device.</P> Fri, 19 Nov 2021 08:30:09 GMT https://community.nxp.com/t5/PowerQUICC-Processors/How-to-flash-u-boot-to-NOR-flash-MT28EW128-using-Codewarrior-8-8/m-p/1374175#M3978 yipingwang 2021-11-19T08:30:09Z