MPC8349EDS - Issues while ltib config

Dinesh — Wed, 20 Dec 2006 02:18:18 GMT

Hi,

I am using ltib to try build my 2.6.x based kernel for MPC8349EDS.

When I try to compile the kernel, I get a error message:

include/linux/kernel.h:10:20: stdarg.h: No such file or directory

I did find the ltib was referencing to the gcc on the host machine ../usr/bin/gcc

While browing through FAQ's, I did come come across a section which talked about configuring ltib to point to the corresponding toolchain. When I tried to run ./ltib -m config , this is what I get:

./ltib -m config
+ cd config/platform/ep83xx
+ '[' -n '' -a -e /prj/ltib/config/profile/ ']'
+ mconf main.lkc
#
# using defaults found in .config
#

Your kernel configuration changes were NOT saved.

This is all I get and I do not get any configuration options or GUI.

What am I missing... I kind of took over from a person who was working on this

and had to jump in the middle to trouble shoot this issue.

Would very much appreciate your support.

Thanks

Alban Edit: CodeWarrior board is for CodeWarrior questions. Post moved and renamed to make device appear in subkect line.

Message Edited by Alban on 2007-03-28 08:32 PM

Re: Issues while ltib config

Voxan — Wed, 28 Mar 2007 19:17:41 GMT

Hi Dinesh,

Looks to me you are not using the right LTIB command.
I would use the ./ltib --config

FYI: you could list all the LTIB commands available for your BSP with ./ltib --help

Hope this helps...

Best Regards

topic Re: Issues while ltib config in PowerQUICC Processors

MPC8349EDS - Issues while ltib config

Re: Issues while ltib config