https://community.nxp.com/t5/PowerQUICC-Processors/PCN-201803021F01/m-p/821728#M2535 <HTML><HEAD></HEAD><BODY><P>According to the PCN:</P><P>No impact on form, fit, function, reliability or quality.</P><P>Case outline spec is maintained while providing a more dimensionally uniform product. This will be observed as a flatter surface with uniform color.</P><P></P><P>Center Gate Mold PQ2 devices were fully qualified and did not show any difference with the existing&nbsp;Glob Top PQ2 devices. If you want to have&nbsp;<SPAN>Center Gate Mold PQ2&nbsp;Qualification report please open the Support Case.</SPAN></P><P></P><P><SPAN>To open the Case please register/sign-in on the NXP WEB nxp.com, "Account" button.<BR />Choose "Support" -&gt; "All support options" and then "Go to Tickets". Here you can open new Technical Support Case.&nbsp;</SPAN></P><P></P></BODY></HTML> Tue, 18 Sep 2018 09:42:46 GMT andrei_skok 2018-09-18T09:42:46Z https://community.nxp.com/t5/PowerQUICC-Processors/PCN-201803021F01/m-p/821727#M2534 <HTML><HEAD></HEAD><BODY><P>PCN 201803021F01 describes a change in molding process. Our application of MPC8255 is flight critical for avionics.</P><P>Are there new qualification activities of our product necessary? Is there a proposal what has to be requalified? e.g. Temperature tests, vibration tests</P><P>Is there any additional risk when using processors with new molding process?</P><P></P><P>Thank you in advance</P><P>Gerhard</P></BODY></HTML> Thu, 13 Sep 2018 08:41:17 GMT https://community.nxp.com/t5/PowerQUICC-Processors/PCN-201803021F01/m-p/821727#M2534 gerhardkramer 2018-09-13T08:41:17Z https://community.nxp.com/t5/PowerQUICC-Processors/PCN-201803021F01/m-p/821728#M2535 <HTML><HEAD></HEAD><BODY><P>According to the PCN:</P><P>No impact on form, fit, function, reliability or quality.</P><P>Case outline spec is maintained while providing a more dimensionally uniform product. This will be observed as a flatter surface with uniform color.</P><P></P><P>Center Gate Mold PQ2 devices were fully qualified and did not show any difference with the existing&nbsp;Glob Top PQ2 devices. If you want to have&nbsp;<SPAN>Center Gate Mold PQ2&nbsp;Qualification report please open the Support Case.</SPAN></P><P></P><P><SPAN>To open the Case please register/sign-in on the NXP WEB nxp.com, "Account" button.<BR />Choose "Support" -&gt; "All support options" and then "Go to Tickets". Here you can open new Technical Support Case.&nbsp;</SPAN></P><P></P></BODY></HTML> Tue, 18 Sep 2018 09:42:46 GMT https://community.nxp.com/t5/PowerQUICC-Processors/PCN-201803021F01/m-p/821728#M2535 andrei_skok 2018-09-18T09:42:46Z