Mpc8548 Development Environment

systick — Wed, 14 Mar 2018 12:01:40 GMT

Hi All,

I find somewhere a board it has mcp8548 processor its PowerPC arch., now I want to install Linux on this board, I set the U-Boot, I have to install U-Boot to processor, boards has a jtag interface and I have multilink-fx development interface, here is the problem;

How can I set the development environment ?

Re: Mpc8548 Development Environment

Pavel — Fri, 16 Mar 2018 04:07:56 GMT

NXP offers CodeWarrior 8.8 and CodeWarrior TAP for software developing, debugging and Flash programming on the MPC8548 boards:

https://www.nxp.com/webapp/swlicensing/sso/downloadSoftware.sp?catid=CWX-ARCHT-EX

Evaluation version of this CodeWarrior provides full functionality during one month.

Use CodeWarrior 8.8 and CodeWarrior TAP for u-boot burning on your board.

Lauterbach and TRACE32 also can be used for u-boot burning on the MPC8548 board.

https://www.nxp.com/products/processors-and-microcontrollers/power-architecture-processors/powerquicc-processors/powerquicc-iii/powerquicc-iii-processor-with-ddr2-pci-pci-express-serial-rapidio-serdes-1-gb-ethernet-security:MPC8548E?tab=Design_Tools_Tab

Have a great day,
Pavel Chubakov

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

PowerQUICC Processors中的主题 Re: Mpc8548 Development Environment

Mpc8548 Development Environment

Re: Mpc8548 Development Environment

See also "Debuggers and Runtime Analysis" on the following page:

https://www.nxp.com/products/processors-and-microcontrollers/power-architecture-processors/powerquicc-processors/powerquicc-iii/powerquicc-iii-processor-with-ddr2-pci-pci-express-serial-rapidio-serdes-1-gb-ethernet-security:MPC8548E?tab=Design_Tools_Tab