topic Re: MPC8377 JTAG problem in PowerQUICC Processors

MPC8377 JTAG problem

xiaoluliao — Tue, 31 Oct 2017 08:34:21 GMT

I use the Jtag downloader to see the attachment. MPC8377 can not be found correctly, please tell me those reasons will cause this result?

The configuration word is provided by CPLD and the MPC8377 is found to be properly configured. The clock is a. 667MHZ, using PCI host mode. The power supply is OK.

Re: MPC8377 JTAG problem

alexander_yakov — Tue, 31 Oct 2017 14:24:27 GMT

This question is specific to third-party debug tool, debug tool vendor is Lauterbach.

Please address this question to Lauterbach support.

LAUTERBACH DEVELOPMENT TOOLS

Have a great day,
Alexander
TIC

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: MPC8377 JTAG problem

xiaoluliao — Fri, 03 Nov 2017 11:48:00 GMT

Thank you！

Please tell me about what is third-party debug tool.Givm me some relevant information

Re: MPC8377 JTAG problem

alexander_yakov — Mon, 06 Nov 2017 05:40:44 GMT

Photos you attached show Lauterbach "Trace32" debugger and Lauterbach "Power debug interface/USB2" debug probe. This is not NXP product, this a product of Lauterbach. Please contact Lauterbach for support.

LAUTERBACH DEVELOPMENT TOOLS