eMMC access on NON-OS Based platform

venkateshn — Wed, 16 Sep 2015 13:08:54 GMT

Hi,

i am using MPC8308 processor for this i am interfacing eMMC chip and this is non OS based Application so kindly suggest me how to access this and share me the required drivers for the same.

Regards,

Venkatesh N

Message was edited by: VENKI N

Re: eMMC access on NON-OS Based platform

lunminliang — Fri, 18 Sep 2015 07:31:29 GMT

Hello VENKI N,

If you're searching driver for eSDHC on MPC8308, you could check the NetComm Software:http://www.freescale.com/products/power-architecture-processors/powerquicc-processors/powerquicc-ii-pro-83xx/netcomm-software-resources:NetComm_Software?fsrch=1&sr=1&pageNum=1

NetComm Software Resources|Freescale

The version for MPC8308 is GA4.4, the driver is under NetCommSw\Peripherals\eSDHC\esdhc.c NetCommSw\Peripherals\eSDHC\esdhc.h

Regards

Lunmin

topic Re: eMMC access on NON-OS Based platform in PowerQUICC Processors

eMMC access on NON-OS Based platform

Re: eMMC access on NON-OS Based platform