Processor Expert Softwareのトピックsbc_fs651 component is not available in processor expert of mpc5777c controller.

sbc_fs651 component is not available in processor expert of mpc5777c controller.

Krishnayya29 — Wed, 19 Apr 2023 14:08:52 GMT

Hi Nxp,

when i import SBC example from NXP for MPC5777c controller, IDE Says that sbc_fs651 is not installed in this version .Could you please help me out to enable this component to make this example work properly. i am using ide S32DS power 2.1 and RTM 3.0.3 SDK version.i pasted image that shows error messages and disabled component below.

Please let me know if i need to communicate with SBC via SPI component, if sbc_fs651 is not available for this controller or SDK.

Thanks,

Krishnayya

Re: sbc_fs651 component is not available in processor expert of mpc5777c controller.

petervlna — Thu, 20 Apr 2023 07:51:42 GMT

Hello,

Hmm, I have just opened new project from example and everything looks fine.

Do you have the correct components installed?

Best regards,

Peter

Re: sbc_fs651 component is not available in processor expert of mpc5777c controller.

Krishnayya29 — Thu, 20 Apr 2023 08:28:25 GMT

Hi Peter,

Thanks for the quick reply.i am not getting option to select version PA15 or PA11 as you.i need to install PA15 SDK version.can you please guide me to to install PA15sdk .

the pop up i am getting from IDE is pasted below.

Thanks,

Krishnayya

Re: sbc_fs651 component is not available in processor expert of mpc5777c controller.

Krishnayya29 — Mon, 24 Apr 2023 05:24:14 GMT

Hi Peter,

Could you please tell me what i am doing wrong while installing or which version i need to install to work with SBC.presently i am using S32DS power architecture 2.1 version and SDK 3.0.3.

Thanks,

Krishnayya

Re: sbc_fs651 component is not available in processor expert of mpc5777c controller.

petervlna — Wed, 26 Apr 2023 07:14:46 GMT

Hello,

Have a look at this thread where one customer solved this issue:

https://community.nxp.com/t5/MPC5xxx/I-get-the-following-error-when-i-laund-the-S32-IDE/m-p/1616682#M23203

Best regards,

Peter